RXXP2XX-R Datasheet, PDF (1/4 Pages) Recom International Power – EN-61010 for Test, Measurement and Lab Use

Features
Unregulated
Converters
● UL/CSA and EN Safety certified
● EN-61010 for Test, Measurement and Lab Use
● EN-60601 for Medical Applications
● Reinforced Isolation 6.4kVDC or 8kVDC
● Optional Continuous Short Circuit Protected
● Compact SIP7 Package
● Efficiency to 88%
● Very Low Isolation Capacitance
● /X2 Version with >9mm Input/Output Clearance
Description
The RxxP2xxS_D Series of DC/DC Converters are certified to UL/CSA-60950 and UL/CSA
60601. This makes them ideal for medical and safety applications where approved or reinforced
isolation is required. The reinforced versions are also EN61010-1 certified for Lab Equipment.
The /X2 version has an input/output clearance of more than 9mm.
Selection Guide
Part
Number
SIP 7
Reinforced
Isolation
(kVDC)
Input
Voltage
(VDC)
Output
Voltage
(VDC)
Output Efficiency
Current Std
(mA)
(%)
Max
Capacitive
Load⁽¹⁾
RxxP23.3S
/R6.4 & /R8 5, 12, 15, 24
3.3
600
72-78
3300µF
RxxP205S
/R6.4 & /R8 5, 12, 15, 24
5
400
79-84
1200µF
RxxP209S
/R6.4 & /R8 5, 12, 15, 24
9
222
80-87
1200µF
RxxP212S
/R6.4 & /R8 5, 12, 15, 24
12
167
80-87
680µF
RxxP215S
/R6.4 & /R8 5, 12, 15, 24
15
132
80-88
680µF
RxxP23.3D
/R6.4 & /R8 5, 12, 15, 24
±3.3 ±300 73-80
±1500µF
RxxP205D
/R6.4 & /R8 5, 12, 15, 24
±5
±200 79-85
±470µF
RxxP209D
/R6.4 & /R8 5, 12, 15, 24
±9
±111 80-87
±470µF
RxxP212D
/R6.4 & /R8 5, 12, 15, 24
±12
±85
80-87
±330µF
RxxP215D
/R6.4 & /R8 5, 12, 15, 24
±15
±66
80-88
±330µF
xx = Input Voltage. Other input and output voltage combinations available on request.
* add Suffix “P” for Continuous Short Circuit Protection, e.g. R05P205S/P, R05P205D/P
* add Suffix “/X2” for single output with alternative pinout, e.g. R05P205S/X2, R05P205S/P/X2
* add Suffix “/R6.4” or “/R8” for Reinforced Isolation, e.g. R05P205D/R6.4, R05P205S/P/X2/R8
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
±10%
Output Voltage Accuracy
±5%
Line Voltage Regulation
1.2%/1% of Vin typ.
Load Voltage Regulation
3.3, 5V output types
15% max.
(10% to 100% full load)
other output types
10% max.
Output Ripple and Noise (20MHz BW)
200mVp-p max.
Operating Frequency
20kHz min. / 50kHz typ. / 85kHz max.
Efficiency at Full Load
65% min. / 80% max.
Minimum Load = 0%
Specifications valid for 10% minimum load only.
Isolation Voltage
/R6.4 (tested for 1 second)
6400VDC
(rated for 1 minute**)
3200VAC / 60Hz
/R8 (tested for 1 second)
8000VDC
(rated for 1 minute**)
4000VAC / 60Hz
Isolation Capacitance
1.5pF min. / 10pF max.
Isolation Resistance
15 GΩ min.
Short Circuit Protection
1 Second
P-Suffix
Continuous
continued on next page
**Any data referred to in this datasheet are of indicative nature and based on our practical experience only. For further details, please refer
to our Application Notes.
E-100
REV: 2/2015
ECONOLINE
DC/DC-Converter
with 3 year Warranty
2 Watt
SIP 7 Single &
Dual Output
RoHS
2011/65/EU
6/6
E-314885
EN-60950-1 Certified
EN-60601-1 Certified
UL/CSA 60950-1 Certified
UL-60601 Certified
EN-61010-1 Certified
IEC-60601-1 CB Report
RxxP2xx/R
Derating-Graph
(Ambient Temperature)
100
80
60
Safe Operating Area
40
20
0
-40
0
50
100 150
85
Operating Temperature °C
Refer to Application Notes
www.recom-power.com