R1S-0505 Datasheet, PDF (1/4 Pages) Recom International Power – 1 Watt SMD Single & Dual Output

Features
Unregulated
Converters
Selection Guide
● Fully RoHS 6/6 Conform
● Full Power at 100°C Ambient Temperature
● 1kVDC or 3kVDC Isolation Options
● UL /CSA Certified, CB Report
● Suitable for Fully Automated Assembly
(including Vapour Phase Soldering)
● Optional Continuous Short Circuit Protection
● Efficiency to 84%
● Built-In EN55022 Class A Filter
Part
Number
SMD
R1S**-xx3.3
R1S**-xx05
R1S**-xx09
R1S**-xx12
R1S**-xx15
R1S**-xx24
R1D**-xx3.3
R1D**-xx05
R1D**-xx09
R1D**-xx12
R1D**-xx15
R1D**-xx24
Input
Output Output Efficiency Max
Voltage
Voltage Current
Capacitive
(3kV)
(VDC)
(VDC)
(mA)
(%)
Load⁽¹⁾
(H)
3.3, 5, 12, 15, 24
3.3
303
75
2200µF
(H)
3.3, 5, 12, 15, 24
5
200
72-78 1000µF
(H)
3.3, 5, 12, 15, 24
9
111
74-78 1000µF
(H)
3.3, 5, 12, 15, 24
12
84
75-80 470µF
(H)
3.3, 5, 12, 15, 24
15
66
75-82 470µF
(H)
3.3, 5, 12, 15, 24 24
42
74-84 220µF
(H)
3.3, 5, 12, 15, 24 ±3.3
±152
75 ±1000µF
(H)
3.3, 5, 12, 15, 24 ±5
±100 72-78 ±470µF
(H)
3.3, 5, 12, 15, 24 ±9
±56
74-78 ±470µF
(H)
3.3, 5, 12, 15, 24 ±12
±42
75-80 ±220µF
(H)
3.3, 5, 12, 15, 24 ±15
±33
75-82 ±220µF
(H)
3.3, 5, 12, 15, 24 ±24
±21
74-84 ±100µF
xx = Input Voltage (other input and output voltage combinations available on request)
* add Suffix “H” for 3kV Isolation, e.g. R1S-0505/H, R1D-0505/H, R1S12-0505/H, R1D12-0505/H
* add Suffix “P” for Continuous Short Circuit Protection, e.g. R1S8-0505/P, R1S-0505/HP, R1D12-0505/HP
* add suffix -R for tape & reel packing e.g. R1S-0505-R. For more details see Application Notes.
Case and Pinning Options (note restrictions on /H option)
R1S** : ** without marking denotes 5 pins out of 8 fitted (includes /H option)
** with marking 8 denotes 8 pins out of 8 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
R1D** : ** without marking denotes 6 pins out of 10 fitted (includes /H option)
** with marking 10 denotes with 10 pins out of 10 fitted (/H option not available)
** with marking 12 denotes 10 pins out of 12 fitted (includes /H option)
Specifications (measured at TA = 25°C, nominal input voltage, full load and after warm-up)
Input Voltage Range
±10%
Output Voltage Accuracy
±2% typ., ±5% max.
Line Voltage Regulation
Load Voltage Regulation
(10% to 100% full load)
All Variants
3.3V output types
5V output type
9V output type
12V, 15V, 24V output types
1.2%/1% of Vin typ.
15% typ., 20% max.
12% typ., 15% max.
7% typ., 10% max.
6% typ., 10% max.
Output Ripple and Noise (20MHz BW limited)
50mVp-p typ., 100mVp-p max.
Operating Frequency
20kHz min. / 60kHz typ. / 100kHz max.
Efficiency at Full Load
See Selection Guide
Minimum Load = 0%
Specifications valid for 10% minimum load only.
cont.
E-24
REV: 1/2013
ECONOLINE
DC/DC-Converter
with 3 year Warranty
1 Watt SMD
Single & Dual
Output
RoHS
2011/65/EU
6/6
E358085
UL-60950-1 Certified
EN-60950-1 Certified
EN-60601-1 Certified*
(*/H suffix)
R1S_R1D
Description
The R1S and R1D converters are of the
enclosed open frame type, i.e. they are
not potted.
The converters are typically used in
general purpose and industrial low
power isolation and voltage matching
applications where an SMD converter is
required.
The converter series feature an exten-
ded ambient temperature operating
range of -40°C ~ +100°C without
derating and optional continuous short
circuit protection.
In addition to two isolation options and
three different case formats, the
converters are also available prepacked
as tape and reel for use with automatic
insertion machines.
Refer to Application Notes
www.recom-electronic.com