PY291A Datasheet, PDF (5/9 Pages) Pyramid Semiconductor Corporation – 2K X 8 REPROGRAMMABLE PROM

AC TEST CONDITIONS
Input Pulse Levels
Input Rise and Fall Times
Input Timing Reference Level
Output Timing Reference Level
Output Load
GND to 3.0V
3ns
1.5V
1.5V
See Figures 1 and 2
PY291A
Figure 1. Output Load
* including scope and test fixture.
Note:
Because of the ultra-high speed of the PY291A, care must be taken
when testing this device; an inadequate setup can cause a normal
functioning part to be rejected as faulty. Long high-inductance leads that
Figure 2. Thevenin Equivalent
cause supply bounce must be avoided by bringing the V_CC and ground
planes directly up to the contactor fingers. A 0.01 µF high frequency
capacitor is also required between V_CC and ground.
Document # EPROM101 REV OR
Page 5 of 9