UZK24.121 Datasheet, PDF (5/9 Pages) PULS GmbH – BATTERY MODULE

U-Series
UZK24.121, UZO24.121
BATTERY MODULE 24V, 12AH
12. UZS24.100 SENSOR BOARD
The battery module includes the monitoring
and protection board UZS24.100. This board
contains a temperature sensor and a center-
tap connection with an auto-resettable fuse to
protect the center-tap wire between the
battery module and the DC-UPS control unit.
The UZS24.100 is compatible with most of the
PULS DC-UPS control units and enables all the
benefits of the PULS 1-Battery-Concept.This
makes the use of matched replacement
batteries unnecessary and allows a precise battery charging and testing which results in the longest possible battery
life.
The use of the sensor board is optional, the DC-UPS will also function without the sensor board installed.
Screw terminal specification:
Solid wire
0.5-1.5mm²
Stranded wire
0.5-1.5mm²
American Wire Gauge
AWG20-12
Max. wire diameter
1.5mm (including ferrules)
Wire stripping length
6mm / 0.25inch
Screwdriver
3x 0.5mm slotted
Recommended tightening torque 0.5Nm/ 4lb-in
Follow national installation codes and installation regulations!
Ensure that all strands of a stranded wire enter the terminal connection!
Unused terminals should be securely tightened.
Ferrules are allowed.
Jul. 2014 / Rev. 1.2 DS-UZK24.121-EN
All parameters are specified at, 25°C ambient temperature unless otherwise noted.
www.pulspower.com Phone [phone] Germany
5/9