QS5.DNET Datasheet, PDF (1/21 Pages) PULS GmbH – 24V, 3.8A, NEC CLASS 2, DEVICENET POWER SUPPLY

Q-Series
QS5.DNET
24V, 3.8A, NEC CLASS 2, DEVICENET^® POWER SUPPLY
POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ DeviceNet^® Approved
ƒ NEC Class 2 Compliant
ƒ Width only 40mm
ƒ Efficiency up to 92%
ƒ Active Power Factor Correction (PFC)
ƒ DC Input from 88 to 360Vdc
ƒ Negligible low Inrush Current Surge
ƒ Short-term Operation down to 60Vac and up to 300Vac
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Quick-connect Spring-clamp Terminals
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The QS5.DNET power supply is a derivate of the
Dimension QS5 family, which is specially designed to
meet the DeviceNet^® requirement. The QS5.DNET exists
beside the QS10.DNET, which is the right choice to
supply networks with the thick cables.
The specialties of DeviceNet^® power supplies are:
ƒ The nominal and overload currents are sized for the
ratings of the DeviceNet^® cables.
ƒ Large load capacitors can be charged in a very short
period of time.
ƒ After turn on, the output voltage increases according
to the DeviceNet^® timing specification.
ƒ The upper level of the output level is limited to
protect the network.
The most outstanding features are a high efficiency,
compact size, wide-range input voltage, a very low
inrush surge and a DC-ok contact. High immunity to
transients and power surges and a low electromagnetic
emission makes usage in nearly every environment
possible.
Unique quick-connect spring-clamp terminals allow a
safe and fast installation. A large international approval
package makes this unit suitable for nearly every
situation.
ORDER NUMBERS
Power Supply QS5.DNET
24V DeviceNet^® unit
Accessory
ZM1.WALL
ZM12.SIDE
UF20.241
Wall mount bracket
Side mount bracket
Buffer unit
SHORT-FORM DATA
Output voltage
DC 24V
Adjustment range fixed
not adjustable
Output current
3.8A
continuous
Output power
91.2W
continuous
Output ripple
< 50mVpp
20Hz to 20MHz
Input voltage
AC 100-240V +10%/-15%
Mains frequency 50-60Hz
±6%
AC Input current 0.85 / 0.45A
at 120 / 230Vac
Power factor
0.98 / 0.90
at 120 / 230Vac
AC Inrush current typ. 9 / 11A peak at 120 / 230Vac
Efficiency
91.4 / 92.0%
at 120 / 230Vac
Losses
8.6 / 7.9W
at 120 / 230Vac
Temperature range -25°C to +70°C operational
Derating
2W/°C
+60 to +70°C
Hold-up time
typ. 44 / 85ms at 120 / 230Vac
Dimensions
40x124x117mm WxHxD
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
Class I Div
2
Marine
EMC, LVD
Mar. 2013 / Rev. 2.2 DS-QS5.DNET-EN
All parameters are specified at 24V, 3.8A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/21