QS20.361 Datasheet, PDF (1/25 Pages) PULS GmbH – 36V, 13.3A, SINGLE PHASE INPUT

Q-Series
QS20.361
36V, 13.3A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ Width only 82mm
ƒ Efficiency up to 94.0%
ƒ 150% (720W) Peak Load Capability
ƒ Safe Hiccup^PLUS Overload Mode
ƒ Easy Fuse Tripping due to High Overload Current
ƒ Active Power Factor Correction (PFC)
ƒ Negligible low Inrush Current Surge
ƒ Short-term Operation down to 60Vac and up to 300Vac
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Quick-connect Spring-clamp Terminals
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The most outstanding features of this Dimension Q-
Series DIN-rail power supply are the high efficiency and
the small size, which are achieved by a synchronous
rectification and further novel design details.
With short-term peak power capability of 150% and
built-in large sized output capacitors, these features
help start motors, charge capacitors and absorb reverse
energy and often allow a unit of a lower wattage class
to be used.
High immunity to transients and power surges as well as
low electromagnetic emission makes usage in nearly
every environment possible.
The integrated output power manager, a wide range
input voltage design and virtually no input inrush
current make installation and usage simple. Diagnostics
are easy due to the dry DC-ok contact, a green DC-ok
LED and red overload LED.
Unique quick-connect spring-clamp terminals allow a
safe and fast installation and a large international
approval package for a variety of applications makes
this unit suitable for nearly every situation.
ORDER NUMBERS
Power Supply QS20.361
36-42V Standard unit
Accessory
ZM2.WALL
ZM15.SIDE
YR40.482
Wall mount bracket
Side mount bracket
Redundancy module
SHORT-FORM DATA
Output voltage
DC 36V
Adjustment range 36 - 42V
Output current
13.3 – 11.4A
20 – 17.1A
Output power
480W
720W
Output ripple
< 100mVpp
Input voltage
AC 100-240V
Mains frequency 50-60Hz
AC Input current 4.56 / 2.48A
Power factor
0.95 / 0.90
AC Inrush current typ. 9 / 7A peak
Efficiency
92.5 / 94.0%
Losses
38.9 / 30.6W
Temperature range -25°C to +70°C
Derating
12W/°C
Hold-up time
typ. 32 / 51ms
Dimensions
82x124x127mm
continuous
for typ. 4s
continuous
for typ. 4s
20Hz to 20MHz
±15%
±6%
at 120 / 230Vac
at 120 / 230Vac
at 120 / 230Vac
at 120 / 230Vac
at 120 / 230Vac
operational
+60 to +70°C
at 120 / 230Vac
WxHxD
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
Marine
Class I Div 2
EMC, LVD, RoHS
Oct. 2013 / Rev. 2.2 DS-QS20.361-EN
All parameters are specified at 36V, 13.3A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/25