CP20.241-R1 Datasheet, PDF (1/30 Pages) PULS GmbH – 24V, 20A, SINGLE PHASE INPUT

PRELIMINARY
CP-Series
CP20.241-R1, CP20.241-R2,
CP20.241-R3
24V, 20A, SINGLE PHASE INPUT
REDUNDANCY POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ Width only 48mm
ƒ Built-in Decoupling Mosfet for 1+1 and n+1 Redundancy
ƒ Efficiency up to 95.2%
ƒ 20% Output Power Reserves
ƒ Safe Hiccup^PLUS Overload Mode
ƒ Easy Fuse Breaking – 3 times nominal current for 12ms
ƒ Active Power Factor Correction (PFC)
ƒ Minimal Inrush Current Surge
ƒ Full Power Between -40°C and +60°C
ƒ DC-OK Relay Contact
ƒ Current Sharing Feature Included
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The CP-Series, part of the DIMENSION power supply
family are cost optimized without compromising
quality, reliability and performance.
The CP20.241-Rx units include a decoupling MOSFET for
building 1+1 or n+1 redundant power supply systems
without the need of external redundancy modules.
These redundancy power supplies come with three
connection terminal options; screw terminals, spring-
clamp terminals or plug connector terminals which
allows replacement on an active application.
The most outstanding features of these units are high
efficiency, electronic inrush current limitation, active
PFC and the wide operational temperature range.
The devices also have a power reserve of 20% included,
which may even be used continuously at temperatures
up to +45°C. Additionally, they can deliver 3 times the
nominal output current for 12ms which helps to trip
fuses on faulty output branches.
With high immunity to transients and power surges, low
electromagnetic emission, a DC-OK signal contact for
remote monitoring, and a large international approval
package, makes this unit suitable for nearly every
application.
SHORT-FORM DATA
Output voltage
Adjustment range
Output current
Output ripple
AC Input voltage
Mains frequency
AC Input current
Power factor
AC Inrush current
Efficiency
Losses
Temperature range
Hold-up time
Size (w x h x d)
Weight
DC 24V
-
24A
20A
15A
max. 50mVpp
AC 100-240V
50-60Hz
4.28 / 2.25A
0.99 / 0.95
10 / 4.5Apk
93.8 / 95.2%
31.7 / 24.2W
-40°C to +70°C
32ms
48x124x127mm
830g / 1.83lb
850g / 1.87lb
0%/+6%
Below +45°C ambient
At +60°C ambient
At +70°C ambient
20Hz to 20MHz
-15%/+10%
±6%
At 120 / 230Vac
At 120 / 230Vac
At 120 / 230Vac
At 120 / 230Vac
At 120 / 230Vac
Without DIN-rail and
plug connectors
CP20.241-R1
CP20.241-R3
CP20.241-R2
ORDER NUMBERS
Power Supply CP20.241-R2 With hot swappable plug
connectors
(preferred inventory item)
CP20.241-R1 With quick-connect
spring-clamp terminals
CP20.241-R3 With screw terminals
Accessory ZM5.WALL Wall mount bracket
MARKINGS
IND. CONT. EQ.
UL 508, planned
UL 60950-1,
planned
Marine, planned
Class I Div 2,
planned
IECEx
ATEX
II 3G Ex ec nC II T4 Gc
planned
June 2017 / Rev. 0.1 DS-CP20.241-R2-EN
All parameters are typical values specified at 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/30