CD5.241-S1 Datasheet, PDF (1/23 Pages) PULS GmbH – DC/DC Converter

CD-Series
CD5.241-S1
DC/DC Converter 24V, 5A
DC/DC CONVERTER
ƒ 24V DC Input
ƒ Quick-connect Spring-clamp Connection Terminals
ƒ Isolated 24Vdc Output
ƒ Efficiency up to 90.2%
ƒ Width only 32mm
ƒ 20% Output Power Reserves
ƒ Full Power Between -25°C and +60°C
ƒ Soft-start Function Included
ƒ Minimal Inrush Current Surge
ƒ Reverse Input Polarity Protection
ƒ DC-OK and Input-low Relay Contact
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The Dimension CD-Series offer DIN-rail DC/DC converters
in the 92-120W output power range in a very compact
housing. These DC/DC converters are allowed to run
with a battery or similar sources or can also be used to
refresh and stabilize the 24Vdc on the end of long cable
runs. The basic units include all the essential basic
functions while the -S1 version is equipped with quick-
connect spring clamp terminals, a DC-OK-contact which
monitors the output and an input-low-relay-contact.
The –L1 version additionally fulfills the NEC Class 2
requirements. All devices except the CD5.241-L1 have a
PowerBoost of 20% incorporated. This extra power can
even be used continuously up to +45°C.
CD-Series
Related products
24V->24V
CD5.241
SLD2.100
24V->5V
CD5.121 24V->12V
CD5.243 12V->24V
CD5.242 48V->24V
CD5.241-L1
24V->24V, NEC Class 2,
Spring-clamp-terminals,
24V->24V,
CD5.241-S1 Spring-clamp-terminals,
Input-low, DC-OK signals
ORDER NUMBERS
DC/DC Converter CD5.241-S1 Standard unit
Accessory
ZM1.WALL
ZM11.SIDE
YR2.DIODE
Wall mount bracket
Side mount bracket
Redundancy module
SHORT-FORM DATA
Output voltage
Adjustment range
Output current
Output power
Output ripple
Input voltage
Input voltage range
Input current
Input inrush current
Efficiency
Losses
Temperature range
Derating
Hold-up time
Dimensions
Weight
DC 24V
24 - 28V
5 – 4.3A
6 – 5.2A
120W
144W
< 50mVpp
DC 24V
18 to 32.4Vdc
14.4 to 18Vdc
typ. 5.5A
typ. 1.2A peak
90.2%
13.3W
-25°C to +70°C
3W/°C
typ. 6ms
32x124x102mm
450g / 0.99lb
*)
ambient <60°C
ambient <45°C
ambient <60°C
ambient <45°C
20Hz to 20MHz
full specified
with derating
at 24Vdc input
at 24Vdc input
at 24Vdc input
operational
+60 to +70°C
at 24Vdc input
WxHxD
*) extended guaranteed adjustment range down to 23V.
MARKINGS
Ind. Cont. Eq.
UL 508
UL 60950-1
UL 61010-1
EMC, ATEX
IECEx
ATEX
Class I Div 2 _{II 3G Ex nA nC II T4 Gc}
Marine
Mar. 2016 / Rev. 1.5 DS-CD5.241-S1-EN
All parameters are specified at 24V, 5A, 24Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/23