PT6554_10 Datasheet, PDF (25/30 Pages) Princeton Technology Corp – LCD Driver IC

PT6554
ELECTRICAL CHARACTERISTICS FOR THE
ALLOWABLE OPERATING CONDITIONS
(Unless otherwise specified, Ta=25℃, V_SS=0V)
Parameter
Symbol
Conditions
Min.
Typ.
Max.
Unit
Hysteresis
VH CE, CLK, DI
0.1 VDD
V
Power-down
detection voltage
VDET
2.7
3.0
V
Input high level
voltage
IIH CE, CLK, DI: VI=VDD
5.0
μA
Input high level
current
IIL
CE, CLK, DI: VI=0V
-5.0
μA
Input floating voltage
VIF KI1 to KI5
0.05VDD
V
Pull-down resistance RPD KI1 to KI5: VDD=5.0V
50
100
250
KΩ
Output off leakage
current
IOFFH DO: VO=6.0V
6.0
μA
VOH1 KS1 to KS6: IO=-500μA
VDD -1.2 VDD -0.5 VDD -0.2
V
Output high level
VOH2 P1 to P4: IO=-1mA
VDD -1.0
V
voltage
VOH3 SG1 to SG41: IO=-20μA
VDD -1.0
V
VOH4 COM1 to COM4: IO=-100μA
VDD -1.0
V
VOL1 KS1 to KS6: IO=25μA
0.2
0.5
1.5
V
Output low level
voltage
VOL2
VOL3
VOL4
P1 to P4: IO=1mA
SG1 to SG41: IO=20μA
COM1 to COM4: IO=100 μA
1.0
V
1.0
V
1.0
V
VOL5 DO: IO=1mA
0.1
0.5
V
VMID1
COM1 to COM4:1/2 bias,
IO=±100μA
1/2VDD -1.0
1/2VDD +1.0 V
VMID2
SG1 to SG41:1/3 bias,
IO=±20μA
2/3VDD -1.0
2/3VDD +1.0 V
Output middle level
voltage *2
VMID3
SG1 to SG41:1/3 bias,
IO=±20μA
1/3VDD -1.0
1/3VDD +1.0 V
VMID4
COM1 to COM4:1/3 bias,
IO=±100μA
2/3VDD -1.0
2/3VDD +1.0 V
VMID5
COM1 to COM4:1/3 bias,
IO=±100μA
1/3VDD -1.0
1/3VDD +1.0 V
Oscillator frequency
fosc OSC:R=62KΩ, C=680pF
40
50
60
KHz
IDD1 Sleep mode
100
μA
Current drain
IDD2
VDD=6.0V, output open,
1/2 bias, fosc=50KHz
250
500
μA
IDD3
VDD=6.0V, output open,
1/3 bias, fosc=50KHz
200
400
μA
Notes:
1. A capacitor must be added to the power line so that both the power supply voltage (VDD) rise time when power is applied and the power supply
voltage (VDD) fall time when power drops are at least 1 ms.
2. DO is an open – drain output and requires a pull-high resistor between 1KΩ to 10KΩ. The pull-up resistor value must be appropriate to the capacitor
of the external wiring so that the signal wave forms are not degraded.
V1.4
25
June 2010