PE613010 Datasheet, PDF (2/8 Pages) Peregrine Semiconductor – UltraCMOS SPST Tuning Control Switch, 100-3000 MHz

Product Specification
PE613010
Table 1. Electrical Specifications @ 25°C, V_DD = 2.75V
Parameter
Condition
Min
Typ
Max Unit
Operational Frequency
100
3000 MHz
R_ON
C_OFF
Insertion Loss¹
Isolation²
Harmonics^3,4
Input IP3
RF+ to RF–, SW_ON, DC measurement
RF+ to RF–, SW_OFF
100 to 960 MHz, (RF+ to RF–), SW_ON
960 to 1710 MHz, (RF+ to RF–), SW_ON
1710 to 2170 MHz, (RF+ to RF–), SW_ON
2170 to 2700 MHz, (RF+ to RF–), SW_ON
2700 to 3000 MHz, (RF+ to RF–), SW_ON
100 to 960 MHz, (RF+ to RF–), SW_OFF
960 to 1710 MHz, (RF+ to RF–), SW_OFF
1710 to 2170 MHz, (RF+ to RF–), SW_OFF
2170 to 2700 MHz, (RF+ to RF–), SW_OFF
2700 to 3000 MHz, (RF+ to RF–), SW_OFF
2fo, 3fo: 698 to 915 MHz, P_IN +35 dBm (SW_ON), P_IN +31 dBm (SW_OFF)
2fo, 3fo: 1710 to 1910 MHz, P_IN +33 dBm, (SW_ON)), P_IN +29 dBm (SW_OFF)
100 to 3000 MHz
1.20
Ω
0.40
pF
0.20 0.30
dB
0.30 0.40
dB
0.40 0.50
dB
0.60 0.70
dB
0.80 0.95
dB
10
11
dB
6
7
dB
4
5
dB
3
4
dB
3
4
dB
–60
–36 dBm
–50
–36 dBm
70
dBm
IMD3
Switching Time
Bands I,II,V,VIII, +20 dBm CW @ TX freq, –15 dBm CW @ 2TX–RX freq, 50Ω, SW_ON
50% VCTRL to 90% RF ON or 10% RF OFF
–115
7
–105
12
dBm
µs
Notes:
1. Assumes optimal matching with 1.5 nH inductor in series with each RF port.
2. Open reflective architecture for flexible configuration of switch in tuning application.
3. Pulsed RF input with 4620 µs period, 50% duty cycle, measured per 3GPP TS 45.005.
4. Power handling in the OFF state reduced due to highly reflective load condition.
©2013–2014 Peregrine Semiconductor Corp. All rights reserved.
Page 2 of 8
DOC-11414-5 │ UltraCMOS^® RFIC Solutions