PAM23LOPR42_15 Datasheet, PDF (2/6 Pages) Protek Devices – USB2.0(480MBPS)SWITCH

ANALOG PRODUCTS DIVISION
Absolute Maximum Ratings⁽¹⁾
Supply Voltage……………………....................... –0.5V to 4.6V
DC Input Voltage…………………………….–0.5V to VCC +0.5V
DC Output Current .....................................................±120mA
Power Dissipation (PD) @ +85°C……………................500mW
PAM23LOPR42
LoPro^™ DPDT USB2.0 (480Mbps) Switch
Storage Temperature Range …………………………….–65°C
to +150°C
Notes:-
1. "Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these
or any other conditions beyond those indicated in the operational sections of this specification is not implied.
2. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed.
3. Control input must be held HIGH or LOW; it must not float
Recommended operating Conditions
SYMBOL
VCC
VCNTRL
VSW
TA
PARAMETER
Supply Voltage
Control Input Voltage
Switch I/O Voltage
Operating Temperature
MIN MAX UNIT
2.7
4.2
V
0
VCC
V
-0.5
4.5
V
°C
DC Electrical Characteristics
SYMBOL PARAMETER
VIK
Clamp Diode Voltage
VIH
Input Voltage High
VIL
IIN
IOZ
IOFF
RON
∆RON
Input Voltage Low
Control Input Leakage
Off State Leakage
Power Off Leakage
Current
Switch On Resistance⁽¹⁾
Delta RON ⁽²⁾
CONDITIONS
IIN = 18mA
VSW = 0 to VCC
0 ≤ Dn, HSD1n, HSD2n ≤
3.6V
VSW = 0V to 4.3V, VCC =
0V
See Figure 4.
VSW = 0V to 4.3V, ION = -
8mA
See Figure 3.
VSW = 0.4V, ION = -8mA
VCC (V)
3.0
3.0 to 3.6
4.2
3.0 to 3.6
4.2
4.2
4.2
0
3.0
3.0
TA = 40 °C to +85 °C
MIN
TYP MAX
-1.2
1.3
1.7
0.5
0.7
-1
1
-2
2
-2
2
7
0.6
ICC
Quiescent Supply Current VCNTRL = 0 or VCC, IOUT = 0
4.2
ICCT
Increase in ICC per Control ^{VCNTRL = 2.6V, VCC = 4.3V}
Voltage and VCC
VCNTRL = 1.8V, VCC = 4.3V
4.2
4.2
Notes:
1. Measured by voltage drop between HSDn and Dn pins at the indicated current through the switch.
2. Guaranteed by characterization
1.0
10.0
15.0
UNITS
V
V
V
V
V
µA
µA
µA
Ω
Ω
µA
µA
µA
2929 S Fair Lane, Tempe, AZ, 85282 Tel: [phone]. Fax: [phone]
95007 Rev.2. 6/13
www.protekdevices.com
NOT FOR USE IN LIFE SUPPORT SYSTEMS