PAM23LOPR42_15 Datasheet, PDF (1/6 Pages) Protek Devices – USB2.0(480MBPS)SWITCH

ANALOG PRODUCTS DIVISION
Features
 Low On-Resistance: 7.0Ω typical.
 Vcc Range: 2.7V to 4.2V ±10%
 Switching Speed 20nS
 Break-Before-Make Switching
 Extended Industrial Temperature Range: –40°C to 85°C
 LoPro^™ Packaging (Pb-free): 10-Lead Micro Package
 Bandwidth 895MHz @ -3dB roll-off.
 Compatible with 1.8V systems.
 Power off protection.
Applications
 Hand Held Devices
 Cell Phones
 PDA’s
 Notebooks
 LCD Monitors
 Set Top Box
 USB2.0 Applications
Pin Definitions
Pin No. Name
Description
PAM23LOPR42
LoPro^™ DPDT USB2.0 (480Mbps) Switch
Description
ProTek Analog’s PAM23LOPR42 is a bidirectional two-port
Hi-speed USB2.0 switch. Configured as a double-pole double
throw (DPDT) switch, it is optimized for switching between two
480Mbps sources or a Hi-speed and Full-speed 12Mbps
source.
The bandwidth of 895MHz allows passing of the 3^rd Harmonic,
resulting in minimal edge and phase distortion.
Superior channel to channel crosstalk minimizes interference.
The PAM23LOPR42 contains circuitry for Power-Off
protection when VCC = 0V. Data pins can tolerate up to 5.5V
The PAM23LOPR42 is compatible with 1.8 and 1.4V
Systems.
Functional Block Diagram
HSD1+
D+
HSD2+
8
3
4,5,6,7
1,2
OE
GND
HSD1n,
HSD2n.
D+, D-
Switch Enable
Ground
Multiplexed DATA I/O
Common Port / USB DATA
HSD1-
HSD2-
SE
L
D-
Control
OE
9
VCC Positive Power Supply
10
SEL Switch Select
Pin Configuration (Top through View)
Logic Function Table
OE
SEL Function
H
X
I/O’s = Hi-Z
L
L
D+,D- = HSD1+, HSD1-
L
H
D+,D- = HSD2+,HSD2-.
Suffix – NQ : This is a commercial grade device and is
not qualified to the AEC-Q101 standard. Please contact
the customer service for more info.
OE 8
7
6
5 HSD1+
VCC
9
4 HSD1-
SEL 10 1
2
3 GND
Temperature
Range
-40 to 85 °C
Package
10 Lead
LoPro
Part Number
PAM23LOPR42-NQ-T7
2929 S Fair Lane, Tempe, AZ, 85282 Tel: [phone]. Fax: [phone]
95007 Rev.2. 6/13
www.protekdevices.com
NOT FOR USE IN LIFE SUPPORT SYSTEMS