PA2535 Datasheet, PDF (2/9 Pages) Protek Devices – 0.35Ω Dual SPDT Analog Switch

ANALOG PRODUCTS DIVISION
Absolute Maximum Ratings
Reference to Ground
V+……………………………………………….-0.3 to +6.0V
IN, COM, NC, NO…………………….....-0.3 to (V+ +0.3V)
Continuous Current (NO, NC, COM)………….…...300mA
PA2535/2536
0.35Ω Dual SPDT Analog Switch
Peak Current………………………………………….500mA
(Pulsed at 1mS, 10% Duty Cycle)
Storage Temperature (D Suffix)………………-65 to 150°C
ESD per Method 3015.7………………………………> 2KV
Power Dissipation……………………………1191mWATT
NOTES
a. Signals on NC, NO, COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered to PC Board.
c. Derate 4.0 mW/°C above 70 °C
d. Derate 14.9 mW/°C above 70 °C
Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is
not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability
.
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: [phone]. Fax: [phone]
2
95060 Rev.2. 10/10
www.protekanalog.com
NOT FOR USE IN LIFE SUPPORT SYSTEMS