PA2535 Datasheet, PDF (1/9 Pages) Protek Devices – 0.35Ω Dual SPDT Analog Switch

ANALOG PRODUCTS DIVISION
Features
 Low Voltage Operation
 Low On-Resistance Ron = 0.35Ω @ 2.7 V
 −69 dB O_IRR @ 2.7 V, 100 kHz
 DFN-10 Package
 ESD Protection >2000 V
 Latch-Up Current >300 mA (JESD 78)
Benefits
 Reduced Power Consumption
 High Accuracy
 Reduce Board Space
 1.8-V Logic Compatible
 High Bandwidth
Applications
 Cellular Phones
 Speaker Headset Switching Audio and
Video Signal Routing
 PCMCIA Cards
 Battery Operated Systems
 Relay Replacement
 USB1.1
V+ 1
NO1
COM1
IN1
NC1 5
PA2535
10 NO2
COM2
IN2
NC2
6 ^GND
V+ ¹
NC1
COM1
IN1
NO1 ⁵
PA2536
10 NC2
COM2
IN2
NO2
6 GND
PA2535/2536
0.35Ω Dual SPDT Analog Switch
Description
The PA2535/PA2536 are 0.35Ω dual SPDT analog switches
designed for low voltage applications.
The PA2535/PA2536 has on-resistance matching (less than
0.05Ω @ 2.7 V) and flatness (less than 0.2Ω @ 2.7 V) that is
guaranteed, over the entire voltage range. Additionally, low
logic thresholds make the PA2535/PA2536 an ideal interface
to low voltage DSP control signals.
The PA2535/PA2536 has fast switching speed with break-
before-make guaranteed. In the On condition, all switching
elements conduct equally in both directions. Off-isolation and
crosstalk is −69 dB @ 100 kHz.
The PA2535/PA2536 is built on ProTek Analog's high-
density low voltage CMOS process. An epitaxial layer is built in
to prevent latchup.
The PA2535/PA2536 contains the additional benefit of
2,000 Volt ESD protections.
In a space saving DFN-10 lead (Pb)-free package, the
PA2535/PA2536 are high performance, low R_on switches for
battery powered applications.
No lead (Pb) is used in the manufacturing process either
inside the device/package or on the external terminations.
As a committed partner to the community and the
environment, ProTek Analog manufactures this product with
the lead (Pb)-free device terminations.
For analog switching products manufactured in DFN
packages, the lead (Pb)-free "LF" suffix is being used as a
designator. Lead (Pb)-free DFN products purchased at any
time will have either a nickel-palladium-gold device termination
or a 100% matte tin device termination.
The different lead (Pb)-free materials are interchangeable and
meet all JEDEC standards for reflow and MSL rating.
Truth Table
Logic
0
1
NC1 and NC2
ON
OFF
NO1 and NO2
OFF
ON
Ordering Information
Temp Range Package
Part Number
-40 to +80°C
DFN-10
PA2535DN-T7 PA2535DN-T13
PA2536DN-T7 PA2536DN-T13
561 E. Elliot Road #175 Chandler, AZ 85225 Tel: [phone]. Fax: [phone]
1
95060 Rev.2. 10/10
www.protekanalog.com
NOT FOR USE IN LIFE SUPPORT SYSTEMS