704-15K36_11 Datasheet, PDF (1/6 Pages) Protek Devices – HIGH POWER AIRCRAFT/ VEHCILE DC BUS VOLTAGE SUPPRESSOR

Only One Name Means ProTek’Tion™
HIGH POWER AIRCRAFT/ VEHCILE DC BUS VOLTAGE SUPPRESSOR
704-15K36 - 704-15K36T
704 package
Description
The 704-15K36 and 704-15K36T are 15 kilowatt silicon transient voltage suppressors (TVS) designed for use primarily in
28 Volt aircraft applications in accordance with MIL-STD-704 and MIL-STD-19500. These assemblies typically operate
with a minimum source impedance of 0.25 Ohms.
These devices have a peak pulse power rating of 15,000 Watts for a 1 ms waveshape and therefore can be used in
applications where induced lightning on rural or remote transmission lines present a hazard to electronic circuitry. The
704-15K36 is designed for high current short peak pulse transient applications, where as the 704-15K36T is designed
for extended peak pulse transients greater than 1 millisecond.
This series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable
tests).
704T package
Features
• Meets MIL-STD-704
• 15 kilowatts Peak Pulse Power per Line (tp = 10/1000µs)
• Each Device 100% Tested
• 28 Volt Power Supply Protection
Mechanical characteristics
• Molded Plastic Case
• 704-15K36 Approximate Weight: 38 grams
• 704-15K36T Approximate Weight: 65 grams
• Flammability Rating UL 94V-0
• Military Screening Available Upon Request for IAW MIL-PRF-19500
• Standard Screening Available Upon Request:
H1 - Submodule Screening (Test Plans 05231 & 05232)
H2 - Submodule & Module Screening (Test Plan 05233)
H3 - Submodule & Module Screening with Group B & C Lot Testing
(Test Plans 05234 & 05235)
applications
• DC Power Supply Protection
• MIL-STD-704 Power Bus Protection
A Warranty Disclaimer is required for the purchase of this part. Contact Customer Service for more information.
05021.R11 4/11
Page 1
www.protekdevices.com