LNK405EG Datasheet, PDF (47/54 Pages) Power Integrations, Inc. – 12 W Non-Isolated, Buck Topology, Power Factor Corrected, LED Driver Using LinkSwitch®-PH LNK405EG

09-Jun-10
DER-192 12 W PAR38 BUCK LED Driver Using LNK405EG
12 Conducted EMI Measurements
12.1 Conducted EMI Test Set-up
Conducted EMI were measured with the LED Board inside the PAR38 housing + LED
loads (12 LED ~ 36 V at 330 mA). A top cover which is isolated from the PAR38 is also
used and this cover is grounded to earth as shown on the Figure below.
Figure 74 – Conducted EMI Measurement Set-up.
Page 47 of 54
Power Integrations
Tel: [phone] Fax: [phone]
www.powerint.com