PS21267-AP Datasheet, PDF (5/8 Pages) Powerex Power Semiconductors – Intellimod Module Dual-In-Line Intelligent Power Module 30 Amperes/600 Volts

Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 [phone] www.pwrx.com
PS21267-P / PS21267-AP
Intellimod™ Module
Dual-In-Line Intelligent Power Module
30 Amperes/600 Volts
Recommended Conditions for Use
Characteristic
Symbol
Condition
Supply Voltage
V_CC
Applied between P-N
Control Supply Voltage
V_D
V_DB
Control Supply Variation
PWM Input Frequency
Allowable rms Current*
ΔV_D, ΔV_DB
f_PWM
I_O
Minimum Input
Pulse Width
P_WIN(on)**
P_WIN(off)***
Below Rated Current
Between Rated Current
& 1.7 Times of Rated Current
Between 1.7 Times of Rated
& 2.0 Times of Rated Current
Applied between V_P1-V_PC, V_N1-V_NC
Applied between
V_UFB-V_UFS, V_VFB-V_VFS, V_WFB-V_WFS
­—
T_C ≤ 100°C, T_j ≤ 125°C
V_CC = 300V, V_D = V_DB = 15V, f_PWM = 5kHz,
PF = 0.8, Sinusoidal, T_j ≤ 125°C, T_C ≤ 100°C
V_CC = 300V, V_D = V_DB = 15V, f_PWM = 15kHz,
PF = 0.8, Sinusoidal, T_j ≤ 125°C, T_f ≤ 100°C
—
200 ≤ V_CC ≤ 350V,
13.5 ≤ V_D ≤ 16.5V,
13.0 ≤ V_DB ≤ 18.5V,
-20°C ≤ T_C ≤ 100°C,
N-line Wiring Inductance Less Than 10nH
V_NC Variation
Arm Shoot-through
Blocking Time
V_NC
t_DEAD
Between V_NC-N (Including Surge)
For Each Input Signal, T_C < 100°C
* The allowable rms current value depends on the actual application conditions.
**If input signal ON pulse is less than PWIN(on), the device may not respond.
***The IPM may fail to respond to an ON pulse if the preceeding OFF pulse is less than PWIN(off).
Min.
0
13.5
13.0
-1
—
—
—
0.3
1.5
3.0
3.6
-5.0
2
Typ. Max. Units
300 400 Volts
15.0 16.5 Volts
15.0 18.5 Volts
— 1 Volts/μs
— 20 kHz
— 19.1 Arms
— 11.6 Arms
— — µs
— — µs
—­ — µs
—­ — µs
— 5.0 Volts
— — µs
08/10 Rev. 01
5