English
Language : 

PS21267-AP Datasheet, PDF (2/8 Pages) Powerex Power Semiconductors – Intellimod Module Dual-In-Line Intelligent Power Module 30 Amperes/600 Volts
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com
PS21267-P / PS21267-AP
Intellimod™ Module
Dual-In-Line Intelligent Power Module
30 Amperes/600 Volts
Absolute Maximum Ratings, Tj = 25°C unless otherwise specified
Characteristics
Symbol
PS21267-P / PS21267-AP
Power Device Junction Temperature*
Tj
Module Case Operation Temperature (See TC Measurement Point Illustration)
TC
Storage Temperature
Tstg
Mounting Torque, M4 Mounting Screws
—
-20 to 125
-20 to 100
-40 to 125
13
Module Weight (Typical)
—
54
Self-protection Supply Voltage Limit (Short Circuit Protection Capability)**
VCC(prot.)
400
Isolation Voltage, AC 1 minute, 60Hz Sinusoidal, Connection Pins to Heatsink Plate
VISO
2500
*The maximum junction temperature rating of the power chips integrated within the DIP-IPM is 150°C (@TC ≤ 100°C). However, to ensure safe operation of the DIP-IPM,
the average junction temperature should be limited to Tj(avg) ≤ 125°C (@TC ≤ 100°C).
**VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125°C, Non-repetitive, Less than 2µs
Units
°C
°C
°C
in-lb
Grams
Volts
Volts
IGBT Inverter Sector
Collector-Emitter Voltage (TC = 25°C)
Collector Current (TC = 25°C)
Peak Collector Current (TC = 25°C, <1ms)
Supply Voltage (Applied between P - N)
Supply Voltage, Surge (Applied between P - N)
Collector Dissipation (TC = 25°C, per 1 Chip)
VCES
±IC
±ICP
VCC
VCC(surge)
PC
600
30
60
450
500
55.5
Volts
Amperes
Amperes
Volts
Volts
Watts
Control Sector
Supply Voltage (Applied between VP1-VPC, VN1-VNC)
Supply Voltage (Applied between VUFB-VUFS, VVFB-VVFS, VWFB-VWFS)
Input Voltage (Applied between UP, VP, WP-VPC, UN, VN, WN-VNC)
Fault Output Supply Voltage (Applied between FO-VNC)
Fault Output Current (Sink Current at FO Terminal)
Current Sensing Input Voltage (Applied between CIN-VNC)
VD
20
Volts
VDB
20
Volts
VIN
-0.5 ~ VD+0.5
Volts
VFO
-0.5 ~ VD+0.5
Volts
IFO
1
mA
VSC
-0.5 ~ VD+0.5
Volts
2
08/10 Rev. 01