PS11036 Datasheet, PDF (4/6 Pages) Powerex Power Semiconductors – Intellimod™ Module Application Specific IPM (30 Amperes/600 Volts)

Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 [phone]
PS11036
Intellimod™ Module
Application Specific IPM
30 Amperes/600 Volts
Electrical and Mechanical Characteristics, T_j = 25°C unless otherwise specified
Characteristics
Symbol
Test Conditions
Min.
Typ. Max. Units
Control Sector
Circuit Current (Average)
Input ON Threshold Voltage
Input OFF Threshold Voltage
Input Pull-up Resistor
I_D
I_DB
V_th(on)
V_th(off)
Ri
T_j = 25°C, V_D = 15V, V_IN = 5V
T_j = 25°C, V_D = V_DB = 15V, V_IN = 5V
Applied between
—
—
50
mA
—
—
5
mA
0.8
1.4
2.0
Volts
2.5
3.0
4.0
Volts
—
50
—
kΩ
PWM Input Frequency
Arm Shoot-through Blocking Time*
Input Interlock Sensing
Inverter DC-link IGBT Current
Sense Voltage Output Signal**
Inverter DC-link IGBT Current
Sense Voltage Output Limit**
Over-Current Trip Level
f_PWM
t_DEAD
t_int
V_amp 100%
V_amp 200%
V_amp 250%
V_amp 0%
OC
Input Terminal-inside Power Supply
T_C ≤ 100°C, T_j ≤ 125°C
Relates to Corresponding Inputs
T_C = -20°C ~ 100°C
Relates to Corresponding Input
I_C = I_OP(100%), V_D = 15V, T_j = 25°C
I_C = I_OP(200%), V_D = 15V, T_j = 25°C
I_C = I_OP(250%), V_D = 15V
I_C = I_OP(0%), V_D = 15V
1
—
15
kHz
2.2
—
—
µS
—
100
—
ns
1.5
2.0
2.5
Volts
3.0
4.0
5.0
Volts
5.0
—
—
Volts
—
50
100
mV
31.1 39.0 60.0 Amperes
Over-Current Delay Time
t_OC
Short-Circuit Trip Level
SC
T_j = 25°C
—
10
—
µS
—
60
— Amperes
Short-Circuit Delay Time
t_SC
—
2
—
µs
Trip Level
UV_D
11.0 12.0 13.0 Volts
Supply Circuit
Reset Level
UV_Dr
11.5 12.5 13.5 Volts
Under-Voltage
Trip Level
UV_DB
T_C = T_j = 25°C
10.1 10.8 11.6 Volts
Protection
Reset Level
UV_DBr
10.6 11.3 12.1 Volts
Delay Time
t_dV
—
10
—
µS
Fault Output Pulse Width***
t_FO
T_j = 25°C
1.0
1.8
—
mS
Fault Output Current***
I_Fo(H)
Open Collector Output
—
—
1
µA
I_Fo(L)
—
—
15
mA
* The dead-time has to be set externally by the CPU; it is not part of the ASIPM internal functions.
**Refer ro the graph on next page.
***Fault output signalling is given only when the internal OC, SC, and UV protection circuits are activated. The OC, SC and UV protection (and fault output) operate for the lower arms only.
The OC and SC protection fault output is given in a pulse format while that of UV protection is maintained thrpughout the duration of the under-voltage condition.
4