CP10TD1-24A Datasheet, PDF (4/6 Pages) Powerex Power Semiconductors – DIP-CIB

Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 [phone]
CP10TD1-24A
DIP-CIB
3Ø Converter + 3Ø Inverter + Brake
10 Amperes/1200 Volts
Electrical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Converter Part
Repetitive Reverse Current
Forward Voltage Drop
IRRM
VFM
VR = VRRM, Tj = 125°C
IF = 10A
Min.
Typ.
Max. Units
—
—
1.0
mA
—
1.1
1.4
Volts
Thermal and Mechanical Characteristics, Tj = 25 °C unless otherwise specified
Characteristics
Symbol
Test Conditions
Min.
Typ.
Max. Units
Common Rating
Contact Thermal Resistance
Rth(c-f)
Case-to-Fin, Thermal Grease Applied
—
0.047
—
°C/W
Inverter Part
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Case
Rth(j-c)Q
Rth(j-c)D
IGBT Part, Per 1/6 Module
FWDi Part, Per 1/6 Module
—
—
1.4
°C/W
—
—
2.0
°C/W
Brake Part
Thermal Resistance, Junction to Case
Thermal Resistance, Junction to Case
Rth(j-c)Q
Rth(j-c)D
IGBT Part
FWDi Part
—
—
1.4
°C/W
—
—
1.7
°C/W
Converter Part
Thermal Resistance, Junction to Case
Rth(j-c)
Per 1/6 Module
—
—
1.3
°C/W
NTC Thermistor Part
Resistance
Rth
TC = 25°C
B Constant*
B(25/100)
Resistance at 25°C, 100°C
*Thermistor resistance RX at arbitrary temperature TX(K) can be calculated with the B constant formula
9.5
10.0 10.5
kΩ
—
3450
—
K
[ ] RX = R25 • exp B(25/100) • ( 1 – 1 )
TX T25
where R25 is the resistance at TC = 25°C, T25 = 298K.
4
Rev. 04/06