CP10TD1-24A Datasheet, PDF (2/6 Pages) Powerex Power Semiconductors – DIP-CIB

Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 [phone]
CP10TD1-24A
DIP-CIB
3Ø Converter + 3Ø Inverter + Brake
10 Amperes/1200 Volts
Absolute Maximum Ratings, Tj = 25 °C unless otherwise specified
Ratings
Junction Temperature
Storage Temperature
Mounting Torque, M4 Mounting Screws
Module Weight Typical
Isolation Voltage (60Hz, Sinusoidal, AC 1 Min., Applied Between Pins and Heatsink)
Symbol
Tj
Tstg
—
—
VISO
Inverter Part
Collector-Emitter Voltage (G-E Short)
Gate-Emitter Voltage (C-E Short)
Collector Current* (DC, TC = 100°C)
Peak Collector Current** (Pulse)
Maximum Collector Dissipation (TC = 25°C)
Emitter Current* (DC, TC = 56°C)
Peak Emitter Current** (Pulse)
VCES
VGES
IC
ICM
PC
IE***
IEM***
Brake Part
Collector-Emitter Voltage (G-E Short)
Gate-Emitter Voltage (C-E Short)
Collector Current* (DC, TC = 100°C)
Peak Collector Current** (Pulse)
Maximum Collector Dissipation (TC = 25°C, Tj < 150°C)
Repetitive Peak Reverse Voltage (Clamp Diode Part)
Forward Current (Clamp Diode Part, Tj < 150°C)
VCES
VGES
IC
ICM
PC
VRRM
IFM
Converter Part
Repetitive Peak Reverse Voltage
Recommended AC Input Voltage)
DC Output Current (Three-phase Rectifying Circuit)
Surge Forward Current (1/2 Cycle at 60 Hz, Peak Value, Non-repetitive)
I2t for Fusing (Value for 1 Cycle of Surge Current)
VRRM
Ea
IO
IFSM
I2t
*TC is measured just underneath the power chip.
**Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max.) rating.
***IE, VEC, trr, and Qrr represent characteristics of the anti-paralleled emitter-to-collector free-wheel diode (FWDi).
CP10TD1-24A
-20 to 150
-40 to 125
13
52
2500
Units
°C
°C
in-lb
Grams
Volts
1200
±20
10
20
96
10
20
Volts
Volts
Amperes
Amperes
Watts
Amperes
Amperes
1200
±20
10
20
104
1200
10
Volts
Volts
Amperes
Amperes
Watts
Volts
Amperes
1600
440
10
200
168
Volts
Volts
Amperes
Amperes
A2s
2
Rev. 04/06