FNP1500 Datasheet, PDF (5/15 Pages) Power-One – 1500 to 5400-Watt Front-End Power Solutions

FNP1500/1800 and FXP1500/1800 Front-Ends
& FNR-3 and FXR-3 Power Shelves Data Sheet
Output Specifications, 48Vout Models
Specification is valid for input voltage, load, and temperature ranges, unless otherwise stated.
Parameter
Conditions/Description
Min
Nominal output voltage Vo1
Nominal output voltage Vo2
Output voltage set point accuracy
Output voltage trimming
(via I²C or with external resistor)
FNP/FXP1500-48G
Nominal
current
output 1
FNP/FXP1800-48G
Current
limit
output 1
FNP/FXP1500-48G
FNP/FXP1800-48G
Nominal current output 2
Current limit output 2
Static line regulation output 1
FNP1500-48G
Static load
regulation
output 1
(droop
characteristic)
FXP1500-48G
FNP1800-48G
FXP1800-48G
I_o = 16.1 A
I_o = 0.5 A
V_i = 230 VAC, I_o1 =16.1 A, T_C = 25 °C
(47.8 - 48.2 VDC)
Adjustable (44.16 to 51.84 VDC)
I_{o1 nom} @ V_i =105 VAC – 264 VAC, P_o 1.5 kW
I_{o1 nom} @ V_i = 85 VAC – 105 VAC, P_o 1.2 kW
I_{o1 nom} @ V_i =180 VAC – 264 VAC,
I_{o1 nom} @ V_i =105 VAC – 180 VAC,
I_{o1 nom} @ V_i = 85 VAC – 105 VAC,
P_o 1.8 kW
P_o 1.5 kW
P_o 1.2 kW
I_{o1 max} @ V_i = 105 VAC – 264 VAC droop hiccup
I_{o1 max} @ V_i = 85 VAC – 105 VAC droop hiccup
I_{o1 max} @ V_i = 180 VAC – 264 VAC
I_{o1 max} @ V_i = 105 VAC – 180 VAC
I_{o1 max} @ V_i = 85 VAC – 105 VAC
droop hiccup
droop hiccup
droop hiccup
I_{o2 nom} @ Vi = 85 VAC – 264 VAC, P_o 12 W
I_{o2 max} @ V_i = 85 VAC – 264 VAC
V_{i min} - V_{i max}, 50 % I_{o nom}
V_i = 230 V, 5-100 % I_{o nom}
V_o : full load (32.2 ADC) to no load
V_i = 230 V, 5-100 % I_{o nom}
V_o : full load (32.2 ADC) to no load
V_i = 230 V, 5-100 % I_{o nom}
V_o : full load (32.2 ADC) to no load
V_i = 230 V, 5-100 % I_{o nom}
V_o : full load (32.2 ADC) to no load
-0.5
-8
-0.5
46.54
46.65
45.91
46.07
Static load regulation
output 2 (droop characteristic)
V_i = 230 V, 5-100 % I_{o nom}
V_o : full load (32.2 ADC) to no load
Dynamic
Load change 50% <─>100% I_{o nom}, dI_o/dt =1 A/μs
Voltage deviation (droop + over- or undershoot)
load
FNP/FXP1500-48G
-5
regulation
FNP/FXP1800-48G
-5.7
All models
Current
Share
Start-up time
FNP1500-48G
FXP1500-48G
FNP/FXP1800-48G
Output voltage ripple and noise
(Filter 10 nF/10 µF)
Remote sense
Max. recovery time to within 1 % of V_{o1 nom}
Difference in current between two units for V_o1 above
10 % load.
Time required for output within regulation
after initial application of AC-input (V_{i nom}, I_{o nom})
after removal of inhibit
(V_{i nom}, I_{o nom})
V_{i nom}, I_{o nom}, 20 MHz bandwidth
V_o1
V_o2
Total compensation for cable losses
Nom
48
12
32.2
25.4
39.2
32.2
25.4
36.8
30
43.8
36.8
30
1.0
1.5
90.1
48
83.5
48
90.1
48
83.5
48
0.4
100
Max
+0.5
Units
VDC
VDC
% V_{o1 nom}
+8
% V_{o1 nom}
39.2
1.0
0.5
49.44
49.34
49.44
49.34
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
ADC
% V_{o nom}
mV/A
VDC
mV/A
VDC
mV/A
VDC
mV/A
VDC
VDC
% V_{o nom}
5
% V_{o nom}
5.7
% V_{o nom}
400
μs
3.2
ADC
5.7
ADC
8
ADC
1.5
s
ms
480
mV_pp
120
mV_pp
500
mV
DEC 12, 2006 revised to FEB 22, 2007
Page 5 of 15
www.power-one.com