CPD200-4530 Datasheet, PDF (4/13 Pages) Power-One – 200 - 250 Watt CompactPCI DC-DC Converters

CPD Series Data Sheet
200 – 250 Watt CompactPCI^® DC-DC Converters
®
Electrical Output Data
General Conditions:
– T_A = 25 °C, unless T_c is specified.
– CPD200: 250 LFM (1.25 m/s), CPD250: 400 LFM (2 m/s),
– Sense lines connected directly at the connector.
Table 4a: Output data for Vo1, Vo2
Output
Characteristics
Conditions
V_o Output voltage
I_{o nom} Nominal output current
V_{i nom}, 50% I_{o nom}
I_{o max} Max. output current
I_oL Output current limit
V_{i min} – V_{i max}
T_{C min} – T_{C max}
I_{o min} Minimum load
v_o Output Switch. frequ. V_{i nom}, I_{o nom}
voltage
BW = 20 MHz
noise
Total
C_ext = 22 µF + 100 nF
∆V_oV Static line regulation
V_{i min} – V_{i max}, I_{o nom}
∆V_oL Static load regulation
V_{i nom}, 50 – 100% I_{o max}
∆V_oS Overshoot at switch on/off
v_{o d} Dynamic Voltage
load
deviation
t_d
regulation _Recovery
time
Vo1: ∆I_o = 10 A, dI_o/dt = 2 A/µs
Vo2: ∆I_o = 10 A, dI_o/dt = 2 A/µs
αV_o Temperature coefficient T_{C min} – T_{C max}
of output voltage
0 – I_{o nom}, V_{i min} – V_{i max}
t_h Hold-up time
starting at V_{i nom}, I_{o nom}
t_s Start-up time
V_{i nom}, I_{o nom}
Vo1
5.0 V
min typ max
4.95 5.0 5.05
20/25 ¹
40
50
no min. load required
60
±25
±50
0
± 120
100
±0.3
4
150 200
Vo2
3.3 V
min typ max
3.267 3.3 3.333
20
40
50
no min. load required
60
±18
±33
0
± 120
100
±0.2
4
150 200
1 _{CPD200: 20 A, CPD250: 25 A}
Unit
VDC
A
mV_pp
mV
µs
mV/K
ms
NOV 28, 2006 revised to JAN 29, 2007
Page 4 of 13
www.power-one.com