ZY1015 Datasheet, PDF (12/17 Pages) Power-One – 15A No-Bus POL 3V to 14V Input 0.5V to 5.5V Output

6. Typical Application
ZY1015 15A No-Bus POL Data Sheet
3V to 14V Input • 0.5V to 5.5V Output
Figure 17. Complete Schematic of Application with Three Independent Outputs. Intermediate Bus Voltage is from 8V to 14V.
In this application four POL converters are configured to deliver three independent output voltages. POL1 and
POL2 are connected in parallel for increased output current. Output voltages are programmed with the resistors
connected between TRIM and VREF pins of individual converters.
POL1 is configured as a master (IM and INTL0…INTL4 pins are grounded) and all other POL converters are
synchronized to the switching frequency of POL1. Interleave is programmed with pins INTL0…INTL4 to ensure
the lowest input and output noise. POL2 has 180° phase shift, POL 3 and POL4 have phase shifts of 270° and
90° respectively.
All converters are controlled by the common ENABLE signal. Turn-on and turn-off processes of the system are
illustrated by pictures in Figure 7 and Figure 8.
REV. 1.2 MAR 14, 2007
www.power-one.com
Page 12 of 17