72902 Datasheet, PDF (2/3 Pages) Pomona Electronics – Micro SMD Grabber Test Clips, Holding Rod and Kit

Models 72902, 72902-0, 72902-2, 72903
Micro SMD Grabber Test Clips, Holding Rod and Kit
Micro SMD Grabber Test Clip
Features
• Designed for easy attachment to SMD chips with
pitches down to 0.008” (0.20 mm).
• Thin yet durable design permits attachment with
close spacing in tight spaces.
• Insulated tip minimizes shorting on adjacent pins.
• Gold plating for low resistance connections.
• Easy attachment to standard test leads
• Holding rods available to reinforce connection
positions during side-by-side measurements
(order Pomona model number 72903)..
Rating: hands free testing in controlled environment:
70 Vrms max. For CE compliance: Not intended for
hand-held use at voltages above 33Vrms/70Vdc
Model 72902-Color
Specifications
Current Max
Max Voltage
Temperature
Max Resistance
Less than 5 mA
33 V AC <70 V DC
-20˚ C + 80˚ C
Less than 200 mΩ
Ordering Information
Model: 72902 Kit pictured above
Model: 72902-Color Grabber pictured on page 2
Available Colors: -0 (Black), -2 (red)
USA: Sales: 800-490-2361 Technical Support: 800-241-
2060 Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
e-mail: [e-mail]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright © 2004 1/19/06 72902, 72903 Rev A Page 2 of 3