72902 Datasheet, PDF (1/3 Pages) Pomona Electronics – Micro SMD Grabber Test Clips, Holding Rod and Kit

Models 72902, 72902-0, 72902-2, 72903
Micro SMD Grabber Test Clips, Holding Rod and Kit
Features
• Kit includes: 12 grabbers (2 of each color) Black
(72902-0), red (72902-2), yellow, green, blue and
white.
• 6 black holding rods to reinforce connection
positions during side-by-side measurements.
model (72903)
• 12 black micro leads with 0.8mm female / 0.8mm
male connectors
• Grabbers are designed for easy attachment to
SMD chips with pitches down to 0.008” (0.20
mm)
• Thin yet durable design permits attachment with
close spacing in tight areas. Insulated tip
minimizes shorting on adjacent pins
• Gold plating for low resistance connections.
Rating: hands free testing in controlled environment:
70 Vrms max. For CE compliance: Not intended for
hand-held use at voltages above 33Vrms/70Vdc
Ordering Information
Model: 72902 Kit pictured above
Model: 72902-Color Grabber pictured on page 2
Available Colors: -0 (Black), -2 (red)
Model: 72903 Holding Rods
Model 72902
USA: Sales: 800-490-2361 Technical Support: 800-241-
2060 Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
e-mail: [e-mail]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright © 2004 1/19/06 72902, 72903 Rev A Page 1 of 3