PL610-01 Datasheet, PDF (5/11 Pages) PhaseLink Corporation – 1.8V to 3.3V, 1MHz to 130MHz XO IC

P (Preliminary) L610-01
1.8V to 3.3V, 1MHz to 130MHz XO IC
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
PARAMETERS
SYMBOL
MIN.
MAX.
UNITS
Supply Voltage Range
VDD
-0.5
4.6
V
Input Voltage Range
VI
-0.5
VDD+0.5
V
Output Voltage Range
VO
-0.5
VDD+0.5
V
Storage Temperature
TS
-65
150
C
Ambient Operating Temperature*
-40
85
C
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device
and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above
the operational limits noted in this specification is not implied. *Operating temperature is guaranteed by design. Parts are tested to commercial grade only.
AC SPECIFICATIONS
PARAMETERS
CONDITIONS
MIN. TYP. MAX. UNITS
Crystal Input Frequency
Fundamental Crystal
5
@ VDD =3.3V
Input (FIN) Frequency
@ VDD =2.5V
1
@ VDD =1.8V
Input (FIN) Signal Amplitude Internally AC coupled (High Frequency)
0.9
Internally AC coupled (Low Frequency)
Input (FIN) Signal Amplitude
0.1
3.3V <50MHz, 2.5V <40MHz, 1.8V <15MHz
Output Frequency
@ Vdd=1.8V-3.3V
20kHz
VDD Sensitivity
Frequency vs. VDD+/-10%
-2
Output Rise Time
15pF Load, 10/90%VDD, High Drive, 3.3V
1
(See MTC-1)
Output Fall Time
15pF Load, 90/10%VDD, High Drive, 3.3V
1
(See MTC-1)
Duty Cycle
(See MTC-1)
45
50
130 MHz
130 MHz
VDD
Vpp
VDD
Vpp
130 MHz
2
ppm
1.2
ns
1.2
ns
55
%
47745 Fremont Blvd., Fremont, California 94538 Tel [phone] Fax [phone] www.phaselink.com Rev 4/2/07 Page 5