PAP7501V Datasheet, PDF (9/12 Pages) Pixart Imaging Inc. – USB2.0 PC Camera Controller

PixArt Imaging Inc.
PAP7501V
USB2.0 Camera
4.7 Recommended Condition For Infrared Reflow
Carefully observe the mounting conditions, recommended temperature profile when
Mounting infrared reflows is show in the figure below.
3FDPNNFOE
3FGMPX
1SPGJMF
Melting area



Pre-heat



           
5JNF ^{( Sec )}
Recommend Pb-free solder paste vender & type : 1. Almit LFM-48W TM-HP
2. Senju M705-GRN360-K
Programming
rate
1.5~2.5 ^oC/sec
Pre-heat
170~200^oC
90 +/- 30 sec
Melting area
>220^oC 30~50sec
with peak temperature 230~245^oC
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
9
PixArt Imaging Inc.
E-mail: [e-mail]
V1.1 May. 2008