PAW3603DH-NF Datasheet, PDF (4/32 Pages) Pixart Imaging Inc. – LOW POWER WIRELESS LASER MOUSE SENSOR

PixArt Imaging Inc.
PAW3603DH-NF
CMOS Laser Mouse Sensor
3. Registers and Operation
The mouse sensor can be programmed through registers, via the serial port, and DSP configuration and motion
data can be read from these registers. All registers not listed are reserved, and should never be written by
firmware.
3.1 Registers
Address
Name
0x00 Product_ID1
0x01 Product_ID2
0x02
0x03
0x04
0x05
0x06
0x07
Motion_Status
Delta_X
Delta_Y
Operation_Mode
Configuration
Image_Quality
R/W
R
R
R
R
R
R/W
R/W
R
Default
Data Type
0x30
0x4X
-
-
-
-
-
-
Eight bits [11:4] number with the product identifier
Four bits [3:0] number with the product identifier
Reserved [3:0] number is reserved for future
Bit field
Eight bits 2’s complement number
Eight bits 2’s complement number
Bit field
Bit field
Eight bits unsigned integer
3.2 Register Descriptions
0x00
Bit
Field
Usage
0x01
Bit
Field
Usage
Product_ID1
7
6
5
4
3
2
1
0
PID[11:4]
The value in this register can’t change. It can be used to verify that the serial communications link is
OK.
Product_ID2
7
6
5
4
3
2
1
0
PID[3:0]
Reserved[3:0]
The value in this register can’t change. PID[3:0] can be used to verify that the serial communications
link is OK. Reserved[3:0] is a value between 0x0 and 0xF, it can’t be used to verify that the serial
communications.
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
4
PixArt Imaging Inc.
E-mail: [e-mail]
V1.0, Aug. 2007