0203137 Datasheet, PDF (2/6 Pages) PHOENIX CONTACT – High Voltage High Current Feed-Through Terminal Blocks

High Current
Feed-Through Terminal Blocks
HDFK 10-HV
(IEC)
[mm²]
Connection data
u
rigid
solid
0.5-16
flexible
stranded
0.5-10
I
U
AWG [A] [V]
20-6 76 1000
Technical data
Feed-through terminal block, for 1 - 4 mm thick housing
panels, with internal and external screw connection
(1) Insertion bridge¹), fully insul.,
fully insulated,
divisible, fully insulated,
(2) Screwdriver,
for actuating the tension spring
2-pos.
3-pos.
10-pos.
Type
Order No.
Pcs.
Pkt.
HDFK 10-HV
07 09 86 4
50
EB 2-10
EB 3-10
EB 10-10
I_max.: 70 A
02 03 15 3
100
70 A 02 03 32 8
10
70 A 02 03 13 7
10
SZS 1,0 x 4,0
12 05 06 6
10
(3) Zack strip, 10-section,
white
ZB 10:UNPRINTED
10 53 00 1
10
Dimensions
Technical data in accordance with IEC/ DIN VDE
Max. cross section with insertion bridge (solid/stranded)
[mm²]
Rated surge voltage / contamination class
[kV] / –
Surge voltage category / insulation material group
–/–
Connection capacity
Stranded with ferrule without / with plastic sleeve
[mm²]
Multi-conductor connection (2 cond. with same cross section)
Solid / Stranded
Stranded with ferrule without plastic sleeve
[mm²]
[mm²]
Stranded with TWIN ferrule with plastic sleeve
[mm²]
Stripping length
[mm]
Internal cylindrical gauge (IEC 60 947-1)
Terminal sleeve: Thread / torque
– / [Nm]
Insulating material
Inflammability class in acc. with UL 94
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
CSA/CUL: [V] / [A] / AWG
1_{) Finger-safe protection is not guaranteeed when using the insertion}
bridge externally.
Note:
With the HDFK and HDFKV, the terminal space must be completely
open when joining both terminal block halves.
The HDFK 10-HV can also be connected if turned by 180°.
see dimensional drawing
10 / 10
6/3
III / I
0.5 - 10 / 0.5 - 10
0.5 - 4 / 0.5 - 4
0.5 - 2.5
0.5 - 6
11
B6
M 4 / 1.5 - 1.8
PA
V0
600 / 65 / 24 - 6
600 / 65 / 22 - 6
10,1
35
28,67
3,3
7,8
Phoenix Contact page 2 of 6