0203137 Datasheet, PDF (1/6 Pages) PHOENIX CONTACT – High Voltage High Current Feed-Through Terminal Blocks

High Voltage
High Current Feed-Through Terminal Blocks
The new High Voltage Generation of high current feed-
through terminal blocks is specially designed for the
requirements of drive technology and power
electronics.
In addition to the already familiar simple assembly, the
outstanding feature of these terminal blocks is a high
nominal voltage of 1000 V. For the conductor cross
section range up to 10 mm², there are the horizontal
feed-through terminal blocks, HDFK 10-HV and the
vertical version, HDFKV 10-HV.
The HDFKV 10-TWIN-HV with a conductor connection
on both sides is used to loop through intermediate
circuit voltages.
In addition to this, the HV range is rounded off by the
molded variant.
The HDFK...-VP-HV terminal blocks are specially
designed for the requirements of potted devices, such
as filter modules, for example. They are an ideal
supplement to the HDFK range for the cross section
range of up to 10 mm².
The external parts of the molded high current feed-
through terminal blocks is identical to those of the
standard HV versions.
On the inside of the device, however, there is a sealing
plate as well as a sponge rubber seal that prevents the
molding compound from leaking out. The connection
here is soldered.
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone [phone] • Fax [phone] • www.phoenixcontact.com