0912034 Datasheet, PDF (1/5 Pages) PHOENIX CONTACT – Electronic device circuit breaker - ECP 4

https://www.phoenixcontact.com/us/products/0912034
Electronic device circuit breaker - ECP 4 - 0912034
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Electronic device circuit breaker, Connection method: Screw connection, Width: 12.5 mm, Fuse type: Electronic,
Fuse type: Automatic device, Mounting type: On base element, Color: black
Why buy this product
■ ^{Can be plugged onto TMCP SOCKET M base}
■ ^{Design width of just 12.5 mm}
■ ^{Selective protection of all 24 V DC load circuits at switched-mode power supply units}
■ ^{Capacitive loads can be switched on and loads are only switched off in the event of an overload or short circuit}
■ ^{Operating or error state indicated by LED and integrated signal contacts}
■ ^{Residual current always limited to 1.8 times the nominal current}
■ ^{Combination of active electronic current limitation and proven circuit breaker technology including electrical isolation}
Key Commercial Data
Packing unit
Minimum order quantity
Custom tariff number
Country of origin
Technical data
General
Installation instructions
Mounting type
Color
1 STK
5 STK
85362010
Germany
When mounted in rows without convection cooling, the nominal device
current should only be led to a maximum of 80 % due to the thermal effect
during continuous operation (100 % operating factor).
Parallel connection of multiple load outputs is not permitted.
On base element
black
08/01/2016 Page 1 / 5