ISP1504A Datasheet, PDF (67/84 Pages) NXP Semiconductors – ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver

NXP Semiconductors
ISP1504A; ISP1504C
ULPI HS USB OTG transceiver
Table 55. Dynamic characteristics: analog I/O pins (DP and DM) …continued
V_CC = 3.0 V to 3.6 V; V_CC(I/O) = 1.65 V to 3.6 V; T_amb = −40 °C to +85 °C; unless otherwise specified.
Typical values are at V_CC = 3.3 V; V_CC(I/O) = 3.3 V; T_amb = +25 °C; unless otherwise specified.
Symbol Parameter
Conditions
Min
Typ
Max
Unit
Driver timing
t_PLH(drv) driver propagation delay TX_DAT, TX_SE0 to DP, DM;
-
-
11
ns
(LOW to HIGH)
see Figure 30
t_PHL(drv) driver propagation delay TX_DAT, TX_SE0 to DP, DM;
-
-
11
ns
(HIGH to LOW)
see Figure 30
t_PHZ
driver disable delay from TX_ENABLE to DP, DM;
HIGH level
see Figure 31
-
-
12
ns
t_PLZ
driver disable delay from TX_ENABLE to DP, DM;
LOW level
see Figure 31
-
-
12
ns
t_PZH
driver enable delay to
TX_ENABLE to DP, DM;
HIGH level
see Figure 31
-
-
20
ns
t_PZL
driver enable delay to
TX_ENABLE to DP, DM;
LOW level
see Figure 31
-
-
20
ns
Receiver timing
Differential receiver
t_PLH(rcv) receiver propagation
DP, DM to RX_RCV, RX_DP
-
-
17
ns
delay (LOW to HIGH)
and RX_DM; see Figure 32
t_PHL(rcv) receiver propagation
DP, DM to RX_RCV, RX_DP
-
-
17
ns
delay (HIGH to LOW)
and RX_DM; see Figure 32
Single-ended receiver
t_PLH(se) single-ended propagation DP, DM to RX_RCV, RX_DP
-
-
17
ns
delay (LOW to HIGH)
and RX_DM; see Figure 32
t_PHL(se) single-ended propagation DP, DM to RX_RCV, RX_DP
-
-
17
ns
delay (HIGH to LOW)
and RX_DM; see Figure 32
ISP1504A_ISP1504C_1
Product data sheet
Rev. 01 — 19 October 2006
© NXP B.V. 2006. All rights reserved.
67 of 84