BGM1013 Datasheet, PDF (6/14 Pages) NXP Semiconductors – MMIC wideband amplifier

Philips Semiconductors
BGM1013
MMIC wideband amplifier
9.1 Flat gain application: 31 dB between 800 MHz and 2.2 GHz
By changing the components at the output of the amplifier, a flatter gain can be obtained.
The gain is 31 dB ± 1 dB between 800 MHz and 2.2 GHz. P_L(1dB) is 10 dBm at 1 GHz and
5.7 dBm at 2.2 GHz.
30 mm
PH
30 mm
IN
OUT
V+
PH
IN
IC1
C1
C3
C2 R1
L1
OUT
V+
001aab397
Fig 3. Printed-circuit board layout and component view for 31 dB flat gain application
Table 10: List of components used for the 31 dB flat gain application ^[1]
Component
Description
Value
Dimensions
C1
multilayer ceramic chip capacitor
100 pF
0603
C2
multilayer ceramic chip capacitor
4.7 nF
0603
C3
multilayer ceramic chip capacitor
22 nF
0603
R1
SMD resistor
27 Ω
0603
L1
SMD inductor
5.6 nH
0603
[1] Pin 2 should not be connected in order to obtain optimal input matching.
9397 750 14413
Product data sheet
Rev. 03 — 9 December 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
6 of 14