SAA7360 Datasheet, PDF (5/20 Pages) NXP Semiconductors – Bitstream conversion ADC for digital audio systems

Philips Semiconductors
Bitstream conversion ADC
for digital audio systems
Product specification
SAA7360
SYMBOL
HPEN
TSEL
WSEL
ODF2 and
ODF1
RESET
CEN
PIN
DESCRIPTION
38 high-pass filter enable input (HPEN = HIGH = enabled); if unconnected this pin defaults
HIGH
39 input to select master (TSEL = LOW) or slave (TSEL = HIGH) operation of the serial
interface; if unconnected this pin defaults HIGH
40 input to indicate 16-bit (WSEL = HIGH) or 18-bit (WSEL = LOW) output data word length of
the serial interface; if unconnected this pin defaults HIGH
41 and 42 serial interface format inputs; these 2 pins determine the interface format in which the device
will operate (see Chapter “Functional Description”); if unconnected these pins will default
HIGH (I²S format)
43 Power-On Reset (POR) input (active LOW) to mute the digital output during power on
44 Chip enable input; this pin, when LOW, disables the operation of the device and 3-states the
outputs of the serial interface bus. This enables the connection of one of more devices to the
output bus; if unconnected this pin defaults HIGH.
handbook, full pagewidth
FSEL 1
TEST1 ²
TEST2 3
VSSD ₄
VDDD ₅
XIN 6
XOUT 7
XSYS1 8
XSYS2 9
SCKI 10
SCKO 11
SAA7360
33 PINL
32 NINL
31 BAOL
30 BAIL
29 ^VDACP
28 ^Iref
27 ^VDACN
26 BAIR
25 BAOR
24 NINR
23 PINR
MLA715 - 2
1995 Apr 24
Fig.2 Pin configuration.
5