P89LPC932A1 Datasheet, PDF (46/64 Pages) NXP Semiconductors – 8-Bit Microcontroller with accelerated two-clock 80C51 core 8kB 3V byte-erasable flash with 512-byte data EEPROM

Philips Semiconductors
P89LPC932A1
8-bit microcontroller with accelerated two-clock 80C51 core
8. Limiting values
Table 8: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). ^[1]
Symbol Parameter
Conditions
Min
Max
Unit
T_amb(bias)
T_stg
operating bias ambient temperature
storage temperature range
−55
+125
°C
−65
+150
°C
I_OH(I/O)
HIGH-level output current per I/O pin
-
20
mA
I_OL(I/O)
LOW-level output current per I/O pin
I_{I/O(tot)(max)} maximum total I/O current
-
20
mA
-
100
mA
V_n
voltage on any pin (except V_SS)
with respect to V_DD
-
P_tot(pack) total power dissipation per package based on package heat
-
transfer, not device power
consumption
+3.5
V
1.5
W
[1] The following applies to Table 8 “Limiting values”:
a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum.
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V_SS unless
otherwise noted.
9397 750 14871
Product data sheet
Rev. 02 — 10 May 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
46 of 64