LP104S5 Datasheet, PDF (4/24 Pages) NXP Semiconductors – LIQUID CRYSTAL DISPLAY

Product Specification
LP104S5-A2VT
Liquid Crystal Display
1. General Description
The LP104S5-A2VT is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode
Fluorescent Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active
element. It is a transmissive type display operating in the normally white mode. This TFT-LCD has a 10.4
inches diagonally measured active display area with SVGA resolution(600 vertical by 800 horizontal pixel
array). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for
each dot, thus, presenting a palette of more than 262,144 colors.
The LP104S5-A2VT is intended to support applications where thin thickness is critical factors and
graphic displays are important. In combination with the vertical arrangement of the sub-pixels, the
LP104S5-A2VT characteristics provide an excellent flat panel display for office automation products such
as Notebook PC.
Timing
Control
Block
Power
Block
Column driver circuit
TFT-LCD
(800 X 600)
CN2
General Features
Active screen size
Outline dimensions
Pixel pitch
Pixel format
Color depth
Luminance,White
Power Consumption
Weight
Display operating mode
Surface treatments
Ver 0.0
Backlight Ass’y
CN1: FI-XB30S-HF10 or equivalent , CN2: BHSR-02VS-1(JST)
10.4 inches(264.16mm) diagonal
224.5(H) X 172.0(V) X 5.7(D) mm (Typ.)
0.264 mm X 0.264 mm
800 horiz. by 600 vert. pixels
RGB stripe arrangement
6-bit, 262,144 colors
170 cd/m² (Typ.)
Total 3.9 Watt(Typ.)
310g (Typ.)
Transmissive mode, normally white
Hard coating (3H),
Anti-glare treatmentAolpfhtahPeofirnot nLtdp. olarizer
Vernissakatu 8A
01300 Vantaa, Finland
http://www.alpha.fi
Oct.06. 2000
Tel.: [phone]
Fax: [phone]
Page 4/23