LP104S5 Datasheet, PDF (14/24 Pages) NXP Semiconductors – LIQUID CRYSTAL DISPLAY

Product Specification
LP104S5-A2VT
Liquid Crystal Display
pixels displaying white. For more information see FIG 1.
3. The variation in surface luminance, δ WHITE is determined by measuring LON at each test
position 1 through 5, and then dividing the maximum LON of 5 points luminance by minimum
LON of 5 points luminance. For more information see FIG 2.
δ WHITE Maximum (L_ON1, L_ON2, ....L_ON5) ÷ Minimum (L_ON1, L_ON2, ....L_ON5)
4. Response time is the time required for the display to transition from white to black (Rise Time,
TrR) and from black to white (Decay Time, TrD). For additional information see FIG 3.
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are
determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which
is normal to the LCD surface. For more information see FIG 4.
6.Gray scale specification.
* Gamma Value = 2.2
Gray Level
Luminance(%) (Typ.)
L0
TBD
L7
TBD
L15
TBD
L23
TBD
L31
TBD
L39
TBD
L47
TBD
L55
TBD
L63
100
FIG. 2 Luminance
<measuring point for luminance variation>
200
400
600
<measuring point for surface luminance >
400
1
2
150
3
300
300
4
450
5
Ver 0.0
Alpha Point Ltd.
Vernissakatu 8A
01300 Vantaa, Finland
http://www.alpha.fi
Oct.06. 2000
Tel.: [phone]
Fax: [phone]
Page 14/23