GTL2004 Datasheet, PDF (4/10 Pages) NXP Semiconductors – Quad GTL/GTL to LVTTL/TTL bidirectional latched translator

Philips Semiconductors
Quad GTL/GTL+ to LVTTL/TTL
bidirectional latched translator
Product specification
GTL2004
ABSOLUTE MAXIMUM RATINGS¹
In accordance with the Absolute Maximum System (IEC 134); voltages are referenced to GND (ground = 0V)
SYMBOL
PARAMETER
TEST CONDITIONS
RATING
UNIT
V_CC
DC supply voltage
I_IK
DC input diode current
V_I
DC input voltage³
V_I < 0
A port
B port
–0.5 to +4.6
V
–50
mA
–0.5 to +7.0
V
–0.5 to +4.6
V
I_OK
DC output diode current
V_O
DC output voltage³
V_O < 0
Output in OFF or HIGH state; A port
Output in OFF or HIGH state; B port
–50
mA
–0.5 to +7.0
V
–0.5 to +4.6
V
I_OL
Current into any output in the LOW state
A port
B port
128
mA
80
mA
I_OH
Current into any output in the HIGH state
A port
–64
mA
T_stg
Storage temperature range
–60 to +150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output negative voltage ratings may be exceeded if the input and output clamp current ratings are observed.
RECOMMENDED OPERATING CONDITIONS¹
SYMBOL
PARAMETER
TEST CONDITIONS
V_CC
Supply voltage
V_TT
Termination voltage
GTL
GTL+
V_REF
Supply voltage
GTL
GTL+
V_I
Input voltage
A port
Except A port
V_IH
HIGH-level input voltage
A port
Except A port
V_IL
LOW-level input voltage
A port
Except A port
I_OH
HIGH-level output current
I_OL
LOW-level output current
B port
A port
B port
T_amb
Operating free-air temperature range
NOTE:
1. Unused control inputs must be held HIGH or LOW to prevent them from floating.
MIN
0
1.14
1.35
0.74
0.87
0
0
V_REF + 50mV
2
–40
TYP
1.2
1.5
0.8
1.0
MAX
3.6
1.26
1.65
0.87
1.10
V_TT
5.5
V_REF – 50mV
0.8
–12
40
12
85
UNIT
V
V
V
V
V
V
mA
mA
mA
°C
1999 Jul 19
4