LPC18S5X_15 Datasheet, PDF (31/152 Pages) NXP Semiconductors – 32-bit ARM Cortex-M3 MCU; up to 1 MB flash and 136 kB SRAM; Ethernet, two High-speed USB, LCD, EMC, AES engine

NXP Semiconductors
Table 3. Pin description …continued
Pin name
LPC18S5x/S3x
32-bit ARM Cortex-M3 microcontroller
Description
P7_5
P7_6
P7_7
A7 -
C7 -
B6 -
133 191 ^[5] N;
PU
134 194 ^[2] N;
PU
140 201 ^[5] N;
PU
I/O GPIO3[13] — General purpose digital input/output pin.
O CTOUT_12 — SCTimer/PWM output 12. Match output 3 of
timer 3.
- R — Function reserved.
O LCD_VD8 — LCD data.
O LCD_VD23 — LCD data.
O TRACEDATA[1] — Trace data, bit 1.
- R — Function reserved.
- R — Function reserved.
AI ADC0_3 — ADC0 and ADC1, input channel 3. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
I/O GPIO3[14] — General purpose digital input/output pin.
O CTOUT_11 — SCTimer/PWM output 1. Match output 3 of timer
2.
- R — Function reserved.
O LCD_LP — Line synchronization pulse (STN). Horizontal
synchronization pulse (TFT).
- R — Function reserved.
O TRACEDATA[2] — Trace data, bit 2.
- R — Function reserved.
- R — Function reserved.
I/O GPIO3[15] — General purpose digital input/output pin.
O CTOUT_8 — SCTimer/PWM output 8. Match output 0 of timer
2.
- R — Function reserved.
O LCD_PWR — LCD panel power enable.
- R — Function reserved.
O TRACEDATA[3] — Trace data, bit 3.
O ENET_MDC — Ethernet MIIM clock.
- R — Function reserved.
AI ADC1_6 — ADC1 and ADC0, input channel 6. Configure the
pin as GPIO input and use the ADC function select register in
the SCU to select the ADC.
LPC18S5X_S3X
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 24 February 2015
© NXP Semiconductors N.V. 2015. All rights reserved.
31 of 152