|
TDA6500TT Datasheet, PDF (3/40 Pages) NXP Semiconductors – 5 V mixer/oscillator and synthesizer for PAL and NTSC standards | |||
|
◁ |
Philips Semiconductors
5 V mixer/oscillator and synthesizer
for PAL and NTSC standards
Product speciï¬cation
TDA6500TT; TDA6501TT
1 FEATURES
⢠Single-chip 5 V mixer/oscillator and synthesizer for
TV and VCR tuners
⢠I2C-bus protocol compatible with 3.3 V and 5 V
microcontrollers:
â Address + 6 data bytes transmission
â Address + 1 status byte (I2C-bus read mode)
â Four independent I2C-bus addresses.
⢠Two PMOS open-drain ports with 5 mA source
capability to switch high band and FM sound trap
(P2 and P3)
⢠One PMOS open-drain port with 20 mA source
capability to switch the mid band (P1)
⢠One PMOS open-drain port with 10 mA source
capability to switch the low band (P0)
⢠Five step, 3-bit Analog-to-Digital Converter (ADC) and
NPN open-collector general purpose port with 5 mA
sinking capability (P6)
⢠NPN open-collector general purpose port with 5 mA
sinking capability (P4)
⢠Internal AGC flag
⢠In-lock flag
⢠33 V tuning voltage output
⢠15-bit programmable divider
⢠Programmable reference divider ratio: 64, 80 or 128
⢠Programmable charge pump current: 60 or 280 µA
⢠Varicap drive disable
⢠Balanced mixer with a common emitter input for the low
band (single input)
⢠Balanced mixer with a common base input for the mid
and high bands (balanced input)
⢠2-pin asymmetrical oscillator for the low band
⢠2-pin asymmetrical oscillator for the mid band
⢠4-pin symmetrical oscillator for the high band
⢠Frequency ranges: see Table 1
⢠IF preamplifier with asymmetrical 75 ⦠output
impedance to drive a SAW filter (500 â¦/40 pF)
⢠Wide-band AGC detector for internal tuner AGC:
â Five programmable take-over points
â Two programmable time constants.
2 APPLICATIONS
⢠TV and VCR tuners
⢠Specially suited for switched concepts, all systems
⢠Specially suited for strong off-air reception.
2003 Jun 05
3
|
▷ |