MB2823 Datasheet, PDF (3/10 Pages) NXP Semiconductors – Dual 9-bit D-type flip-flop with reset and enable 3-State

Philips Semiconductors Advanced BiCMOS Products
Dual 9-bit D-type flip-flop with
reset and enable (3-State)
Product specification
MB2823
FUNCTION TABLE
INPUTS
nOE
nMR
nCE
nCP
nDx
OUTPUTS
nQ0 – nQ8
OPERATING MODE
L
L
X
X
X
L
L
H
L
↑
h
H
L
H
L
↑
l
L
L
H
H
↑
X
NC
H
X
X
X
X
Z
H=
h=
L=
l=
NC=
X=
Z=
↑=
↑=
High voltage level
High voltage level one set-up time prior to the Low-to-High clock transition
Low voltage level
Low voltage level one set-up time prior to the Low-to-High clock transition
No change
Don’t care
High impedance “off” state
Low to High clock transition
Not a Low-to-High clock transition
Clear
Load and read data
Hold
High impedance
ABSOLUTE MAXIMUM RATINGS^{1, 2}
SYMBOL
PARAMETER
CONDITIONS
RATING
UNIT
V_CC
DC supply voltage
–0.5 to +7.0
V
I_IK
DC input diode current
V_I
DC input voltage³
V_I < 0
–18
mA
–1.2 to +7.0
V
I_OK
V_OUT
DC output diode current
DC output voltage³
V_O < 0
output in Off or High state
–50
mA
–0.5 to +5.5
V
I_OUT
DC output current
output in Low state
128
mA
T_stg
Storage temperature range
–65 to 150
°C
NOTES:
1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction
temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C.
3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
V_CC
V_I
V_IH
V_IL
I_OH
I_OL
∆t/∆v
T_amb
DC supply voltage
Input voltage
High-level input voltage
Low-level input voltage
High-level output current
Low-level output current
Input transition rise or fall rate
Operating free-air temperature range
LIMITS
MIN
MAX
4.5
5.5
0
V_CC
2.0
0.8
–32
64
0
10
–40
+85
UNIT
V
V
V
V
mA
mA
ns/V
°C
August 24, 1993
4