TDA8589J Datasheet, PDF (28/55 Pages) NXP Semiconductors – I2C-bus controlled 4 45 Watt power amplifier and multiple voltage regulator

Philips Semiconductors
I²C-bus controlled 4 45 Watt power
amplier and multiple voltage regulator
Product specication
TDA8589J; TDA8589xJ
SYMBOL
PARAMETER
CONDITIONS
MIN.
TYP.
Power switch 2: SW2 (amplier)
V_drop(SW2) dropout voltage
I_limit
current limit
Backup switch
I_O = 300 mA
I_O = 400 mA
V_O 8.5 V
0.6
0.6
0.5
1
I_DC(BU)
continuous current
V_BUCAP 6 V
0.4
1.5
V_clamp(BU) clamping voltage
V_P = 30 V;
24
I_O(REG2) = 100 mA
V_drop
dropout voltage
I_O = 500 mA;
0.6
(V_P V_BUCAP)
Notes
1. The quiescent current is measured in standby mode when R_L = .
2. The rise and fall times are measured with a 50 pF load capacitor.
3. The reset delay time depends on the value of the reset delay capacitor:
t_{d rst} = ^C-----R----^E_I--c-^S--_h-^C----^A---^P-- V_{th rst} = C_RESCAP
750 10³ s
4. The dropout voltage of a regulator is the voltage difference between V_P and V_O(REGn).
5. At current limit, V_O(REGn) is held constant (see Fig.6).
6. The foldback current protection limits the dissipation power at short-circuit (see Fig.6).
7. The dropout voltage of regulator 2 is the voltage difference between V_BUCAP and V_O(REG2).
MAX.
0.8
1.1
28
0.8
UNIT
V
V
A
A
V
V
2004 Feb 24
28