English
Language : 

74HC4053 Datasheet, PDF (22/33 Pages) NXP Semiconductors – Triple 2-channel analog multiplexer/demultiplexer
◁
Philips Semiconductors
74HC4053; 74HCT4053
Triple 2-channel analog multiplexer/demultiplexer
14. Additional dynamic characteristics
Table 14: Additional dynamic characteristics 74HC4053 and 74HCT4053
GND = 0 V; Tamb = 25 °C.
Vis is the input voltage at an nYn or nZ terminal, whichever is assigned as an input.
Vos is the output voltage at an nYn or nZ terminal, whichever is assigned as an output.
Symbol Parameter
Conditions
Min
dsin
sine wave distortion RL = 10 kΩ; CL = 50 pF; see Figure 15
fi = 1 kHz
VCC = 2.25 V; VEE = −2.25 V; Vis = 4.0 V (p-p) -
VCC = 4.5 V; VEE = −4.5 V; Vis = 8.0 V (p-p)
-
α(OFF)(ft)
Vct(sw-sw)
OFF-state
feed-through
attenuation
crosstalk between
switches
fi = 10 kHz
VCC = 2.25 V; VEE = −2.25 V; Vis = 4.0 V (p-p) -
VCC = 4.5 V; VEE = −4.5 V; Vis = 8.0 V (p-p)
-
RL = 600 Ω; CL = 50 pF; fi = 1 MHz; see
[1]
Figure 16
VCC = 2.25 V; VEE = −2.25 V
-
VCC = 4.5 V; VEE = −4.5 V
-
RL = 600 Ω; CL = 50 pF; fi = 1 MHz; see
[1]
Figure 17
VCC = 2.25 V; VEE = −2.25 V
-
VCC = 4.5 V; VEE = −4.5 V
-
Vct(d-sw)
crosstalk between VCC = 4.5 V; RL = 600 kΩ; CL = 50 pF;
[2]
digital inputs and
fi = 1 MHz; see Figure 18
switch
VEE = 0 V
-
VEE = −4.5 V
-
f(-3dB)
−3 dB frequency
RL = 50 Ω; CL = 10 pF; see Figure 19
[3]
response
VCC = 2.25 V; VEE = −2.25 V
-
VCC = 4.5 V; VEE = −4.5 V
-
[1] Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω).
[2] Control input E or Sn, with square-wave between VCC and GND.
[3] Adjust input voltage Vis to 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 Ω).
Typ Max Unit
0.04 -
%
0.02 -
%
0.12 -
%
0.06 -
%
−50 -
dB
−50 -
dB
−60 -
dB
−60 -
dB
110 -
220 -
160 -
170 -
mV
mV
MHz
MHz
nYn
Vis
10 µF
or
nZ
channel
ON
nZ
or
nYn
RL
CL dB
Vos
GND
001aae132
Fig 15. Test circuit for measuring sine wave distortion
74HC_HCT4053_4
Product data sheet
Rev. 04 — 9 May 2006
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
22 of 33
 ▷