TDA7000 Datasheet, PDF (2/10 Pages) NXP Semiconductors – FM radio circuit

Philips Semiconductors
FM radio circuit
Product specification
TDA7000
GENERAL DESCRIPTION
The TDA7000 is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
is important (small dimensions and low costs).
The IC has an FLL (Frequency-Locked-Loop) system with an intermediate frequency of 70 kHz. The i.f. selectivity is
obtained by active RC filters. The only function which needs alignment is the resonant circuit for the oscillator, thus
selecting the reception frequency. Spurious reception is avoided by means of a mute circuit, which also eliminates too
noisy input signals. Special precautions are taken to meet the radiation requirements.
The TDA7000 includes the following functions:
• R.F. input stage
• Mixer
• Local oscillator
• I.F. amplifier/limiter
• Phase demodulator
• Mute detector
• Mute switch
QUICK REFERENCE DATA
Supply voltage range (pin 5)
Supply current at V_P = 4,5 V
R.F. input frequency range
Sensitivity for -3 dB limiting
(e.m.f. voltage)
(source impedance: 75 Ω; mute disabled)
Signal handling (e.m.f. voltage)
(source impedance: 75 Ω)
A.F. output voltage at R_L = 22 kΩ
V_P 2,7 to 10 V
I_P typ. 8 mA
f_rf 1,5 to 110 MHz
EMF typ. 1,5 µV
EMF typ. 200 mV
V_o typ. 75 mV
PACKAGE OUTLINE
18-lead DIL; plastic (SOT102HE); SOT102-1; 1996 July 24.
May 1992
2