SC16C650A Datasheet, PDF (2/50 Pages) NXP Semiconductors – Universal Asynchronous Receiver/Transmitter (UART) with 32-byte FIFO and infrared (IrDA) encoder/decoder

Philips Semiconductors
SC16C650A
UART with 32-byte FIFO and IrDA encoder/decoder
s Four selectable Receive and Transmit FIFO interrupt trigger levels
s Standard modem interface or infrared IrDA encoder/decoder interface
s Sleep mode
s Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun
Break)
s Independent receiver clock input
s Transmit, Receive, Line Status, and Data Set interrupts independently controlled
s Fully programmable character formatting:
x 5-, 6-, 7-, or 8-bit characters
x Even-, Odd-, or No-Parity formats
x 1-, 1¹â„₂-, or 2-stop bit
x Baud generation (DC to 3 Mbit/s)
s False start-bit detection
s Complete status reporting capabilities
s 3-State output TTL drive capabilities for bi-directional data bus and control bus
s Line Break generation and detection
s Internal diagnostic capabilities:
x Loop-back controls for communications link fault isolation
s Prioritized interrupt system controls
s Modem control functions (CTS, RTS, DSR, DTR, RI, DCD).
3. Ordering information
Table 1: Ordering information
Industrial: V_CC = 2.5 V, 3.3 V or 5 V ± 10%; T_amb = −40 °C to +85 °C.
Type number
Package
Name
Description
SC16C650AIA44 PLCC44 plastic leaded chip carrier; 44 leads
SC16C650AIB48 LQFP48 plastic low profile quad flat package; 48 leads; body 7 × 7 × 1.4 mm
SC16C650AIN40 DIP40
plastic dual in-line package; 40 leads (600 mil)
Version
SOT187-2
SOT313-2
SOT129-1
9397 750 11622
Product data
Rev. 04 — 20 June 2003
© Koninklijke Philips Electronics N.V. 2003. All rights reserved.
2 of 50