LP064V1 Datasheet, PDF (2/20 Pages) NXP Semiconductors – LP064V1 LIQUID CRYSTAL DISPLAY

LP064V1 LIQUID CRYSTAL DISPLAY
SPECIFICATIONS
TITLE: LP064V1 REV. 1 PAGE 2 OF 2
1. GENERAL DESCRIPTION
The LG.Philips LCD model LP064V1 LCD is a Color Active Matrix Liquid Crystal
Display with an integral Cold Cathode Fluorescent Tube(CCFT) back light system.
The matrix employs a-Si Thin Film Transistor as the active element. It is a
transmissive type display operating in the normally white mode. This TFT-LCD has a
6.4 inch diagonally measured active display area with VGA resolution(480 vertical by
640 horizontal pixel array). Each pixel is divided into Red, Green and Blue sub-
pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of
the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus,
presenting a pallete of more than 262,144 colors. The LP064V1 LCD is intended to
support applications where low power consumption, weight and thickness are critical
factors and graphic displays are important. In combination with the vertical arrangement
of the sub-pixels, the LP064V1 characteristics provide an excellent flat panel display for
office automation products such as portable computers and measurement equipment.
R[0:5]
G[0:5]
B[0:5]
CLK
HSYNC
VSYNC
DTMG
Column Driver (UP)
640 x RGB x 480
TFT LCD Array
+5V
VSS
Power Supply
DC/DC
Column Driver (DOWN)
+12V
VSS
INVERTER
B/L
CN
General Display Characteristics
The following are general features of model LP064V1 LCD:
Active display area:
Outsize dimensions:
Pixel pitch:
Pixel format
Color depth:
Display operating mode:
Surface treatment:
6.4 inches (cm) diagonal
168W x 123H x 9.0D mm Typ.
0.204 mm * 0.204 mm
640 hor. By 480 ver. Pixels
RGB stripe arrangement
6-bit
transmissive mode, normally white
hard coating (2H),
anti-glare treatment of the front polarizer
DATA DISPLAY AG
Industriestrasse 1
D-82110 Germering
MAY 2001
http://www.datadisplay.de
Tel.: [phone]
Fax: [phone]