SSL21081AT Datasheet, PDF (13/22 Pages) NXP Semiconductors – Compact non-dimmable LED driver IC

NXP Semiconductors
SSL21082AT
Mains dimmable LED driver IC
9. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
General
SR
slew rate
on pin DRAIN
5
P_tot
total power dissipation
SO12 package
-
T_amb
ambient temperature
40
T_j
junction temperature
40
T_stg
storage temperature
55
Voltages
V_CC
V_DRAIN
V_HV
V_SOURCE
V_NTC
V_TONMOD
Currents
supply voltage
voltage on pin DRAIN
voltage on pin HV
voltage on pin SOURCE
voltage on pin NTC
voltage on pin TONMOD
continuous
current limited
current limited
current limited
current limited
[1] _0.4
0.4
0.4
0.4
0.4
0.4
I_DD
I_DRAIN
I_SOURCE
I_DVTD
supply current
current on pin DRAIN
current on pin SOURCE
current on pin DVDT
on pin VCC
duration 20 s
maximum
[2] _-
2
2
-
Electrostatic discharge
V_ESD
electrostatic discharge
human body
1
voltage
model; pins
DRAIN and HV
human body
model; all other
pins
[3] _2
charged device
[4] _500
Max
+5
1
+125
+150
+150
+20
+300
+600
+5.2
+5.2
+5.2
20
+2
+2
1.3
+1
+2
+500
Unit
V/ns
W
C
C
C
V
V
V
V
V
V
mA
A
A
A
kV
kV
V
[1] The current flowing into the VCC pin must not exceed the maximum I_DD value.
[2] An internal clamp sets the supply voltage.
[3] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k series resistor.
[4] Charged device model: equivalent to charging the IC up to 1 kV and the subsequent discharging of each
pin down to 0 V over a 1 resistor.
SSL21082AT
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 3 October 2013
© NXP B.V. 2013. All rights reserved.
13 of 21