74HC4051 Datasheet, PDF (12/16 Pages) NXP Semiconductors – 8-channel analog multiplexer/demultiplexer

Philips Semiconductors
8-channel analog multiplexer/demultiplexer
Product specification
74HC/HCT4051
ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT
Recommended conditions and typical values
GND = 0 V; T_amb = 25 °C
SYMBOL PARAMETER
sine-wave distortion
f = 1 kHz
sine-wave distortion
f = 10 kHz
switch “OFF” signal
feed-through
typ.
0.04
0.02
0.12
0.06
−50
−50
UNIT
V_CC
(V)
% 2.25
% 4.5
% 2.25
% 4.5
dB 2.25
dB 4.5
V_(p−p)
crosstalk voltage between
control and any switch
(peak-to-peak value)
110 mV 4.5
220 mV 4.5
f_max
minimum frequency
response (−3dB)
170 MHz 2.25
180 MHz 4.5
C_S
maximum switch capacitance
independent (Y)
5
pF
common (Z)
25 pF
V_EE
(V)
−2.25
−4.5
−2.25
−4.5
−2.25
−4.5
0
−4.5
−2.25
−4.5
V_is(p−p)
(V)
4.0
8.0
4.0
8.0
note 1
note 2
CONDITIONS
R_L = 10 kΩ; C_L = 50 pF
(see Fig.14)
R_L = 10 kΩ; C_L = 50 pF
(see Fig.14)
R_L = 600 Ω; C_L = 50 pF
(see Figs 12 and 15)
R_L = 600 Ω; C_L = 50 pF;
f = 1 MHz (E or S_n,
square-wave between
V_CC and GND,
t_r = t_f = 6 ns)
(see Fig.16)
R_L = 50 Ω; C_L = 10 pF
(see Fig.13 and 14)
Notes to AC characteristics
1. Adjust input voltage V_is to 0 dBm level (0 dBm = 1 mW into 600 Ω).
2. Adjust input voltage V_is to 0 dBm level at V_os for 1 MHz (0 dBm = 1 mW into 50 Ω).
General note
V_is is the input voltage at a Y_n or Z terminal, whichever is assigned as an input.
V_os is the output voltage at a Y_n or Z terminal, whichever is assigned as an output.
Test conditions:
V_CC = 4.5 V; GND = 0 V; V_EE = −4.5 V;
R_L = 50 Ω; R_source = 1 kΩ
Fig.12 Typical switch “OFF” signal feed-through as a function of frequency.
December 1990
12