SC16C650B Datasheet, PDF (1/51 Pages) NXP Semiconductors – 5 V, 3.3 V and 2.5 V UART with 32-byte FIFOs and infrared (IrDA) encoder/decoder

SC16C650B
5 V, 3.3 V and 2.5 V UART with 32-byte FIFOs
and infrared (IrDA) encoder/decoder
Rev. 03 — 10 December 2004
Product data
1. General description
The SC16C650B is a Universal Asynchronous Receiver and Transmitter (UART)
used for serial data communications. Its principal function is to convert parallel data
into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.
The SC16C650B is pin compatible with the ST16C650A and it will power-up to be
functionally equivalent to the 16C450. Programming of control registers enables the
added features of the SC16C650B. Some of these added features are the 32-byte
receive and transmit FIFOs, automatic hardware or software flow control and infrared
encoding/decoding. The selectable auto-flow control feature significantly reduces
software overload and increases system efficiency while in FIFO mode by
automatically controlling serial data flow using RTS output and CTS input signals.
The SC16C650B also provides DMA mode data transfers through FIFO trigger levels
and the RXRDY and TXRDY signals. On-board status registers provide the user with
error indications, operational status, and modem interface control. System interrupts
may be tailored to meet user requirements. An internal loop-back capability allows
on-board diagnostics.
The SC16C650B operates at 5 V, 3.3 V and 2.5 V, and the industrial temperature
range, and is available in plastic DIP40, PLCC44, LQFP48, and HVQFN32 packages.
2. Features
s Single channel
s 5 V, 3.3 V and 2.5 V operation
s 5 V tolerant inputs
s Industrial temperature range (−40 °C to +85 °C)
s After reset, all registers are identical to the typical 16C450 register set
s Capable of running with all existing generic 16C450 software
s Pin compatibility with the industry-standard ST16C450/550, TL16C450/550,
PC16C450/550. Software compatible with ST16C650.
s Up to 3 Mbit/s transmit/receive operation at 5 V, 2 Mbit/s at 3.3 V, and 1 Mbit/s at
2.5 V
s 32 byte transmit FIFO
s 32 byte receive FIFO with error flags
s Programmable auto-RTS and auto-CTS
x In auto-CTS mode, CTS controls transmitter
x In auto-RTS mode, RxFIFO contents and threshold control RTS
s Automatic software/hardware flow control
s Programmable Xon/Xoff characters